[{"ModuleCode":"AR3411","ModuleTitle":"Architecture Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"ARCHITECTURE","ModuleDescription":"The internship programme aims to provide opportunities\nfor third year undergraduates to work in architectural or\nallied firms or organisations with design centric focus to\ngain the exposure and experience and apply the\nknowledge learnt in school in the professional setting\nStudents are required to perform a structured and\nsupervised internship in a company/organization for a\nminimum of 8 weeks during Special Terms. Weekly\nlogbook as well as internship reports will be used a part\nof the evaluation of their internship experience.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have taken AR3101 and AR3102","Preclusion":"","Corequisite":""},{"ModuleCode":"AR5103","ModuleTitle":"ARCHITECTURAL DESIGN THESIS","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"ARCHITECTURE","ModuleDescription":"Students are assigned a Thesis supervisor who will assist the student in identifying and developing the Thesis topic. Students spend the early part of the thesis researching the topic and identifying key issues and design agenda. Students will then proceed to formulate an architectural project to explore the Thesis. In the later stages of the studio, each student will develop a comprehensive architectural design solution in response to the issues and brief identified earlier. In this later stage of the Thesis project students are required to develop technological and material responses to the thesis issue(s) developed earlier. The thesis submission comprises of a report, drawings, and models.","CrossModule":"","ModuleCredit":"24","Workload":"4-4-0-22-40","Prerequisite":"","Preclusion":"non architecture students","Corequisite":""},{"ModuleCode":"AR5104","ModuleTitle":"FINAL DESIGN PROJECT","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"ARCHITECTURE","ModuleDescription":"The final Design Project for the M (Arch) with a specialization in Design Technology and Management is the culmination of the technical and design learning predicated on the instrumental value of technical design as a means of to a wider agenda of sustainable building, resource conservation and creating positive environmental impacts. Students are expected to demonstrate research in design technology as a basis for addressing emergent and perceived need in the aesthetic, cultural and social field. The use of design as a form of research applied to building infrastructure or the environment relevant to practical design issues in industry. Students are required to produce drawings and models illustrating technical exploration and resolution with digitally aided or lab based experimentation. Projects will be supervised by tutors of students choice assisted by a panel of technical specialists.","CrossModule":"","ModuleCredit":"20","Workload":"4-4-0-22-40","Prerequisite":"","Preclusion":"Non Architecture students","Corequisite":""},{"ModuleCode":"AR5422","ModuleTitle":"ARCHITECTURAL PRACTICE 2","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"ARCHITECTURE","ModuleDescription":"This module will provide students with the knowledge and understanding to enter into architectural practice. It will enable students to understand the legal roles and responsibilities of the architect, the branches of laws applicable to the construction industry, the Singapore Institute of Architects and Public Sector contracts.  Major topics covered are the law of contracts, tort, property land law and copyright, duties of architects, the Singapore Institute of Architects and Public Sector form of contracts.","CrossModule":"","ModuleCredit":"4","Workload":"2-2-0-3-3","Prerequisite":"","Preclusion":"NIL","Corequisite":""},{"ModuleCode":"BAA6003C","ModuleTitle":"Seminar on Financial Analyst Research","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"ACCOUNTING","ModuleDescription":"This module is designed to prepare doctoral students with the necessary knowledge and skills to complete their dissertations. Methodological and econometric issues surrounding topics such as financial analysts and stock market anomalies would be covered.","CrossModule":"","ModuleCredit":"2","Workload":"0-3-0-3-4","Prerequisite":"BAA6001 (BAA6002 and BAA6003C could be taken in \ndifferent order).","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5013","ModuleTitle":"CORPORATE STRATEGY","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"This course focuses on the work of top management in business organisations.  The primary perspective adopted is that of the general manager at the head of a business entitya?\"the corporation, business, division or planta?\"whose main responsibility is the overall success of his or her organisation.  The course concentrates on the skills and actions required of the general manager for the development, communication and implementation of strategic organisational choices in the context of complex business situations. Two related areas comprise the core of the course.  The first, strategy formulation, address the goals and objectives of the course, and the means by which these goals and objectives are to be achieved.  The second area, strategy implementation, concentrates on how the general manager deploys the organisationa??s resources to implement, control and improve the formulated strategy. In order to capture the pragmatic, action oriented nature of the general managera??s task and the complexity of the environment in which he or she operates, part of the course is taught through the case method.  In addition, students will be exposed to a range of practitioner or theoretical readings on the subject.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-0-7","Prerequisite":"BMA5003 and BMA5009","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5102","ModuleTitle":"LEGAL ISSUES IN BUSINESS","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"This course introduces students to the basics of laws and legal reasoning, particularly in the context of business. Topics covered under this course include the role of law and international organizations in business, sources of international and domestic law, classification of law, dispute resolution, conflicts of\r\nlaw and contract law. Students will be able to understand the legal risks involved when entering into contracts with parties from another jurisdiction and the different ways they can seek redress when the other party defaults.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-0-7","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5119","ModuleTitle":"Family Business","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"","CrossModule":"","ModuleCredit":"2","Workload":"0-3-0-3-4","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5127","ModuleTitle":"Consultng: Process, Industry and Innovation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"This course will cover the drivers and essential capabilities required in managing consulting tasks. The course will focus on management consulting in particular and provide an in-depth examination of dozens of consulting case studies as well as to have students participate in roleplaying the consulting process.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-4-3","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5236","ModuleTitle":"Global Operations Strategy","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"As companies go regional and go global, they will face challenges associated with operating in diverse environments with different levels of infrastructure development, geopolitical systems, and business cultures. Especially in the context of Asia, these challenges are twofold:  operating in Asia, as well as for Asian companies aspiring to grow regionally and globally. \r\n\r\nThe course will look at an organization’s international strategy, operational planning, and execution. It will also look at look at driving corporate strategy across countries and business divisions. This will be in the context of planning for market entry, global supply chain strategy, and setting up distribution and service networks.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-4-3","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5302","ModuleTitle":"INVESTMENT ANALYSIS AND MANAGEMENT","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"The course is an introduction to portfolio management theory and practice covering aspects of investments and analysis relevant to asset management companies. Most of the core areas covered are in line with the CFA core body of knowledge for investment analysts and portfolio managers. We will focus on the main asset classes ? stocks and bonds and will also be covering derivatives and swaps. Starting from security analysis, sector and market strategies, the course will extend into portfolio management. \r\n\r\nThough valuation techniques and theories are foundations to any investment analysis, the over-riding factor hinges on market knowledge and experience and the process of translating this knowledge into investment strategies. This course will not only introduce the basic concepts and the nuts and bolts of investments but will also focus on real-time market analysis. Besides covering investment theory, the class will be required to apply the methodology into real life applications and translate these applications into actual portfolio strategies. These assignments will subsequently be channeled into an investment portfolio that the candidate will manage in a team environment. Participants will have to enroll into a stock market stimulation game with emphasis on the implementation of course study materials into market actions.\r\n","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-0-7","Prerequisite":"BMA5008","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5406","ModuleTitle":"Negotiations and Conflict Management","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"The course objectives are:\r\n1. To teach and enhance negotiation and conflict resolution skills;\r\n2. To get a good mix of participants from different backgrounds and allow participants to interact and share different perspectives to conflict resolution;\r\n3. To adopt an open and experiential to allow participants to reflect, contribute, and relate their life experiences to  participation;\r\n4. To provide a good classroom environment in which participant creativity and spontaneity can be encouraged and fostered.\r\n\r\nThe course draws from the experiential workshops on Negotiation conducted at the Program on Negotiation at Harvard Law School and Mediation programs by LEADR in Australia, and also the work on ?difficult conversations? by the Harvard Negotiations Project. The theory of negotiation and conflict resolution will be introduced through short lectures, discussions, and papers.  Participants are then expected to apply and demonstrate the acquired knowledge through practice negotiations, mediations, and one-on-one difficult conversations.\r\n","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-0-7","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5422","ModuleTitle":"How to Successfully Lead Your Groups and Teams","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"This module objective is to focus on evidence-based\r\nmanagement to try and understand what drives the\r\nbehavior of groups and their members. Our job is to try\r\nand understand when, if, and how phenomena change as\r\nwe place people in situations where they need to rely on\r\nothers to get the job done. The module will loosely follow\r\nTuckman’s (1965) forming, storming, norming, and\r\nperforming model of group development. However, much\r\nof our attention will be focused on the forming stage, as\r\neverything that follows depends on successfully building\r\nthe team. In this module we will discuss the topics\r\nspecifically in the group and team context.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-4-3","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5505","ModuleTitle":"SERVICES MARKETING","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"This course provides an in-depth appreciation and understanding of the unique challenges inherent in managing and delivering service excellence at a profit.  Participants will be introduced to and have the opportunity to work with tools and strategies that address these challenges.  It develops an understanding of the `state of the art? of service management thinking and promote a customer service-oriented mindset.\r\n","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-0-7","Prerequisite":"BMA5009","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5534","ModuleTitle":"Marketing in China","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"Marketing in the Chinese market requires an understanding of the Chinese culture, the rapid changes in technology adoption and its impact on buying behavior. Successful marketing in China demands a clear comprehension of the various demographic idiosyncrasies of the Chinese market. Effective marketing entails having empathy for and communicating with the target market. This course will explore the Chinese market environment, study the Chinese consumer and corporate buyer, compare how the Chinese market differs from other markets and examine the various components of marketing, from product development to pricing before evaluating the present and future challenges in marketing in China.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-4-3","Prerequisite":"BMA5009","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5901","ModuleTitle":"MANAGEMENT PRACTICUM","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMA5903","ModuleTitle":"MBA Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"This in an internship module lasting a minimum of 16 weeks. The minimum number of hours of work is set at 640 hours.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-36-4","Prerequisite":"Students must have completed at least one semester of MBA programme","Preclusion":"","Corequisite":""},{"ModuleCode":"BMK6111N","ModuleTitle":"Seminar in Marketing Strategy and Industrial Organization II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"MARKETING","ModuleDescription":"This module is to provide marketing doctoral students with an orientation to current research in the field of marketing. The primary objectives are to provide students with exposure to representative samples of significant research streams, current issues, and research priorities in the marketing field, and to introduce doctoral students to the research interests of the NUS marketing faculty and visiting professors.","CrossModule":"","ModuleCredit":"2","Workload":"3-0-0-4-3","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMS5203","ModuleTitle":"The Knowledge & Innovation Economy 4.0","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"DEAN'S OFFICE (BIZ)","ModuleDescription":"This module explores the dynamics of the platform economy and the transformative technologies driving the Industry 4.0 phenomenom.\n\nStudents will explore the merits of collaborative networks and open source business models, as well as contemplate entirely new ideas and strategies for the AI,IoT and datadriven virtual business landscapes of the future.","CrossModule":"","ModuleCredit":"4","Workload":"0-6-0-2-2","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BMS5801","ModuleTitle":"Communication and Influencing Skills for Managers","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"NON-FACULTY-BASED DEPARTMENTS","Department":"CTR FOR ENGLISH LANGUAGE COMMUNICATION","ModuleDescription":"The module aims to develop students, as future managers, in the core competencies to communicate with influence in order to build trust, gain cooperation and support, secure loyalty and commitment, and motivate and inspire positive change in the 21st century workplace that is characterised by constant change and cultural diversity. The module will discuss pertinent management communication principles, concepts and strategies and provide opportunities for their application in hands-on tasks and assignments in an immersive experience within a company simulated  environment, where critical high-stakes communication is weaved into more routine day-to-day workplace communication, mimicking the situations managers encounter in real-life.","CrossModule":"","ModuleCredit":"4","Workload":"0-3.5-0-3-3.5","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"BN4101R","ModuleTitle":"B.Eng. Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"BIOMEDICAL ENGINEERING","ModuleDescription":"This module consists mainly of a research-based project carried out under the supervision of one or more faculty members. It introduces students to the basic methodology of research in the context of a problem of current research interest. The module is normally taken over two consecutive semesters.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-0-15","Prerequisite":"Stage 4 standing","Preclusion":"Nil","Corequisite":""},{"ModuleCode":"CG4001","ModuleTitle":"B. Eng. Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"JOINT MULTI-DISCIPLINARY PROGRAMMES","Department":"COMPUTING & ENGINEERING","ModuleDescription":"In this module, students will embark on a project that involves a mix of research, design and development components on a topic of current interest in Computer\r\nEngineering. Students learn how to apply knowledge and skills acquired in the classroom to develop innovative ways of solving problems. In the process, students acquire skills for independent and lifelong learning. The module is normally carried out over two semesters, but may also be structured as a further 6-month extension of an existing 6-month industrial attachment, where the student works on real life projects jointly supervised by NUS faculties and industry experts.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-14-1","Prerequisite":"Level 4 standing","Preclusion":"EE4001 B.Eng. Dissertation\r\nCP4101 B.Comp. Dissertation","Corequisite":""},{"ModuleCode":"CH3550","ModuleTitle":"Chinese Studies Internship (taught in English)","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"CHINESE STUDIES","ModuleDescription":"Internships vary in length but all take place within organisations or companies, are vetted and approved by the Department of Chinese Studies, have relevance to the major, involve the application of subject knowledge and theory in reflection upon the work, and are assessed. Available credited internships will be advertised at the beginning of each semester. Internships proposed by students will require the approval of the Department.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-6-4","Prerequisite":"Major in CH/CL with 24 MCs of CH/CL modules.","Preclusion":"Any other XX3550 internship modules in China. \r\n(Note: Students who change major may not do a second internship in their new major)","Corequisite":""},{"ModuleCode":"CL3550","ModuleTitle":"Chinese Language Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"CHINESE STUDIES","ModuleDescription":"Internships vary in length but all take place within organisations or companies, which are vetted and approved by the Department of Chinese Studies, have relevance to the major, involve the application of subject knowledge and theory in reflection upon the work, and are assessed. Available credited internships will be advertised at the beginning of each semester. Internships proposed by students will require the approval of the Department.","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"Major in CH/CL with 24 MCs of CH/CL modules.","Preclusion":"Any other XX3550 internship modules\r\n(Note: Students who change major may not do a second internship in their new major)","Corequisite":""},{"ModuleCode":"CM1417X","ModuleTitle":"Fundamentals of Chemistry","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"The objective of this module is to provide an introduction to the fundamental topics and concepts in chemistry. This includes topics such as structure of matter, periodic table and periodicity, chemical bonding, states of matter, stoichiometry, reaction types, kinetics, equilibrium and introduction to organic chemistry.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-4-3","Prerequisite":"’O’ level pass in chemistry or equivalent","Preclusion":"Students with ‘A’ level or H2 Chemistry or equivalent.\nor CM1417","Corequisite":"None"},{"ModuleCode":"CM1502X","ModuleTitle":"General and Physical Chemistry for Engineers","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"This module introduces some basic principles of general and physical chemistry to engineering students. Topics covered include atomic and molecular structures, spectroscopies and their applications, bonding and interactions in interfaces and materials, chemical equilibrium, chemical kinetics, common molecules and their transformations especially in chemical and pharmaceutical industries. The purpose is to provide engineering students the foundations in important concepts and principles of chemistry, with an emphasis on practical applications in engineering and technology.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-3-0-3","Prerequisite":"'A' level or H2 pass in Chemistry or equivalent or CM1417 /CM1417X","Preclusion":"CM1502, CM1502FC, Chemistry majors","Corequisite":""},{"ModuleCode":"CM2288","ModuleTitle":"Basic UROPS in Chemistry I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"CM1111 or CM1121or CM1131; AND Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"CM2289","ModuleTitle":"Basic UROPS In Chemistry II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"CM1111 or CM1121 or CM1131; and Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"CM3288","ModuleTitle":"Advanced UROPS in Chemistry I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"CM3289","ModuleTitle":"Advanced UROPS in Chemistry II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"CM3291","ModuleTitle":"Advanced Experiments In Organic & Inorganic Chemistry","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"Laboratory work in Inorganic and Organic chemistry. This module is a major requirement for Chemistry students.\n\n","CrossModule":"","ModuleCredit":"4","Workload":"0-0-6-2-2","Prerequisite":"CM2111, CM2121 and CM2191","Preclusion":"","Corequisite":""},{"ModuleCode":"CM3311","ModuleTitle":"Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"In addition to having an academic science foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives Science students the opportunity to acquire work experience via internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 10-12 weeks during Special Term.\r\n\r\nThrough regular meetings with the Academic Advisor (AA) and internship Supervisor, students learn how knowledge acquired in the curriculum can be transferred to perform technical/practical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have completed 3 regular semesters of study, have declared Chemistry as first major and have completed a minimum of 32 MCs in Chemistry major at time of application.","Preclusion":"XX3311 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"CM3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"In addition to having a good academic record and technical\nfoundation, students with good soft skills and some\nindustrial attachment or internship experiences often stand\na better chance when seeking for jobs. This module gives\nnon-Applied Science students the opportunity to embark\non internships during their undergraduate study.\n\nThe module requires students to compete for position and\nperform a structured internship in a company/institution for\n16-20 weeks during regular semester. Through regular\nmeetings with the Academic Advisor and internship\nSupervisor, students explore how knowledge learnt in the\ncurriculum can be transferred to perform technical\nassignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-40-0","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Chemistry as first major and have completed a minimum of 32 MCs in Chemistry major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective\nmajor.","Corequisite":"Nil"},{"ModuleCode":"CN1111X","ModuleTitle":"Chemical Engineering Principles","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"CHEMICAL & BIOMOLECULAR ENGINEERING","ModuleDescription":"This module provides students with a basic concept of chemical engineering processes and related problem-solving methods. It provides a comprehensive introduction to the principles of chemical engineering process analysis. The module begins with an overview of the chemical process industry and a discussion of several significant examples. Details of steady state material and energy balance, including recycles, phase change and reaction, form the core substance of the course. Other topics include simultaneous mass and energy balances and unsteady state balances. All concepts and principles are amply illustrated with relevant process examples. This module is targeted at level one engineering or science students.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0-0-4","Prerequisite":"H2 Mathematics, H2 Chemistry and H2 Physics (or PC1221 Fundamentals of Physics I) or equivalent","Preclusion":"CN1111, CN1111FC","Corequisite":""},{"ModuleCode":"CN3135E","ModuleTitle":"Process Safety, Health and Environment","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module aims to provide fundamental concepts and methods for the design and operation of safe plants. The students will gain a thorough understanding of chemical process hazards, their identification, their potential effects on safety, health, and the environment, and methods of assessment and control. Emphasis is placed on the integrated management of safety, health, and environmental sustainability.","CrossModule":"","ModuleCredit":"3","Workload":"2-1-0-2-2.5","Prerequisite":"CN2121E & CN2122E","Preclusion":"TCN3135","Corequisite":"NIL"},{"ModuleCode":"CN4118","ModuleTitle":"B.Eng. Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"CHEMICAL & BIOMOLECULAR ENGINEERING","ModuleDescription":"The project aims to provide students with training for scientific or technical research. The module involves an assignment of a research project, equipment training and safety education. Students need to spend at least one full day per week on the project under the guidance of the project supervisor and co-supervisor. A thesis is required at the end of the semester, including literature survey, materials and method, results and discussion, and suggestions for further study. A poster presentation is also required. This module is targeted at all level 4 chemical engineering students.","CrossModule":"","ModuleCredit":"8","Workload":"0-1-12-0-7","Prerequisite":"CN3108 - Chemical Engineering Process Laboratory II and at least 4 of the 5 core modules:\r\nCN3121 - Process Dynamics and Control\r\nCN3124 - Fluid-Solid Systems\r\nCN3132 - Separation Processes\r\nCN3135 - Process Safety, Health & Environment\r\nCN3421 - Process Modelling and Numerical Simulation\r\nor approval by the Head of the Department","Preclusion":"","Corequisite":""},{"ModuleCode":"CN4118E","ModuleTitle":"B.Tech. Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"The module involves an assignment of a research project and safety education. Equipment training will be provided if required. Students need to spend at least eight-hours per week on the project under the guidance of the project supervisor and/or co-supervisor. A thesis is required at the end of the project, including literature survey, materials and method, results and discussion, and suggestions for further study. An oral presentation is also required. This module is targeted at all level 4 engineering students.","CrossModule":"","ModuleCredit":"10","Workload":"0-0-0-25-0","Prerequisite":"TC1401 & TC1422 & CN1111E & TC1402/ TC2401 & TC2421 & CN2121E & CN2122E & CN2116E & CN2125E & CN3124E & CN3421E & CN3121E & CN3132E & CN4111E/CN3135E","Preclusion":"TC4118","Corequisite":"NIL"},{"ModuleCode":"CN4118R","ModuleTitle":"B.Eng. Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"CHEMICAL & BIOMOLECULAR ENGINEERING","ModuleDescription":"The project aims to provide students with training for scientific or technical research. The module involves an assignment of a research project, equipment training and safety education. Students need to spend at least one full day per week on the project under the guidance of the project supervisor and co-supervisor. A thesis is required at the end of the semester, including literature survey, materials and method, results and discussion, and suggestions for further study. A poster presentation is also required. This module is targeted at all level 4 chemical engineering students.\n\n","CrossModule":"","ModuleCredit":"10","Workload":"0-1-14-0-9","Prerequisite":"CN3108 and at least 4 of the 5 core modules: CN3121, CN3124, CN3132, CN3135 and CN3421, or approved by the Head of the Department","Preclusion":"","Corequisite":""},{"ModuleCode":"CN4123E","ModuleTitle":"Design Project","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"In this capstone design project, students execute a group project to design a chemical production facility. They solve a practical design problem in the same way as might be expected in an industrial situation. Students develop and\r\nevaluate process flowsheet alternatives via rigorous simulation, perform preliminary sizing, analyze safety and hazards, and estimate costs and profitability. Further, they learn how to solve open-ended problems by making critical\r\ndesign decisions with sound scientific justification and giving due consideration to cost and safety. Project coordinators act as facilitators, and students work almost independently on the project and exercise their creativity.","CrossModule":"","ModuleCredit":"7","Workload":"1-1-0-10.5-5","Prerequisite":"CN3135E Process Safety, Health and Environment\r\nCN3421E Process Modelling & Numerical Simulation\r\nCN4122E Process Synthesis and Simulation\r\nTG2415 Ethics in Engineering","Preclusion":"","Corequisite":""},{"ModuleCode":"CN4211E","ModuleTitle":"Petrochemicals & Processing Technology","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"The course provides an overview of the petrochemical industry, with a focus on the Singapore industry. The following processes are discussed in the first part: Refining, Steam Reforming, Steam Cracking, Ammonia and Methanol production. To provide an in-dept understanding, fundamental aspects of the processes, i.e. catalysis, kinetics, thermodynamics and reactor design will be highlighted. The second part of this module starts with an introduction to the fundamental organic reaction types and the structural characteristics of the compounds involved. It is then followed by an introduction to homogeneous catalysis using organometallic compounds as catalysts. The third topic of this part covers a series of derivatives from ethylene, propene, butenes, BTX (bezene-toluene-xylenes), focusing on functional group conversion ad applications of target compounds. The forth topic covers the main fine chemicals, such as surfactants, special monomers, adhesives and intermediates for personal care and pharmaceutics. The final topic introduces the basic concept of green chemical process, focusing on development of chemicals that are more environmental friendly.","CrossModule":"","ModuleCredit":"4","Workload":"2.5-1-0-1.5-5","Prerequisite":"","Preclusion":"TC4211, TCN4211","Corequisite":""},{"ModuleCode":"CN4216E","ModuleTitle":"Electronic Materials Science","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module provides students with a fundamental knowledge of electronic materials produced or processed in various industries. It imparts a basic understanding in electrical, electro-optic and magnetic properties of electronic materials in relation to their importance in microelectronic/ optoelectronic/semiconductor industry and their technological applications such as wafer devices, solid-state fuel cells, lithium batteries, light-emitting diodes and solid-state lasers. In particular, semi-conductors, electronic ceramics, conducting polymers, optical and magnetic materials, and nanostructured materials will be introduced. This module is targeted at senior engineering students.","CrossModule":"","ModuleCredit":"4","Workload":"2.5-1-0-1.5-5","Prerequisite":"TC1422","Preclusion":"TC4216, TCN4216","Corequisite":""},{"ModuleCode":"CP2202","ModuleTitle":"Work Experience Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"DEAN'S OFFICE (SCHOOL OF COMPUTING)","ModuleDescription":"This module is open to undergraduates who have completed at least 60 MCs and plan to proceed on an approved internship of at least 10 weeks in duration in the vacation. It recognizes work experiences in fields that could lead to viable career pathways that may/may not be directly related to the student’s major. It is accessible to students for academic credit even if they had previously completed internship stints for academic credit not exceeding 12 MCs, and if the new work scope is substantially differentiated from previously completed\r\nones. The module is assessed on Completed Satisfactory/Uncompleted Satisfactory (CS/CU) basis.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-36-4","Prerequisite":"This internship module is open to full-time undergraduate students who have completed at least 60MCs and plan to proceed on an approved internship of at least 10 weeks in duration in the vacation period.","Preclusion":"Full-time undergraduate students who have accumulated more than 12 MCs for previous internship stints.","Corequisite":""},{"ModuleCode":"CP3200","ModuleTitle":"Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"DEAN'S OFFICE (SCHOOL OF COMPUTING)","ModuleDescription":"The IT industry and related businesses are developing rapidly for which students need to have an opportunity to expose themselves to the latest industry developments. This internship module requires students to work in a\r\ncompany for a period of three months. Their progress on projects will be monitored during attachment, and their performance will be graded as “Completed\r\nSatisfactory/Completed Unsatisfactory (CS/CU)” at the end of the attachment, based on the final project report. During the attachment, students are not expected to take other modules offered by the university.","CrossModule":"","ModuleCredit":"6","Workload":"0-0-0-15-0","Prerequisite":"Students can only take this module after completing 70\r\nMCs. Student Selection process will be enforced","Preclusion":"Nil","Corequisite":"Students can only take this module after completing 70"},{"ModuleCode":"CP3202","ModuleTitle":"Internship II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"DEAN'S OFFICE (SCHOOL OF COMPUTING)","ModuleDescription":"The IT industry and related businesses are developing\r\nrapidly for which students need to have an opportunity to\r\nexpose themselves to the latest industry developments.\r\nThis internship module requires students to work in a company for a period of three months. Their progress on projects will be monitored during attachment, and their performance will be graded as “Completed Satisfactory/Completed Unsatisfactory (CS/CU)” at the end of the attachment, based on the final project report.\r\n\r\nThis is the second three month internship for the School of Computing students. With two internships, the student will be able to experience work in two distinct types of organizations, such as a start-up and a MNC, or in two different industries.","CrossModule":"","ModuleCredit":"6","Workload":"0-0-0-15-0","Prerequisite":"CP3200 Internship","Preclusion":"","Corequisite":""},{"ModuleCode":"CP3880","ModuleTitle":"Advanced Technology Attachment Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"DEAN'S OFFICE (SCHOOL OF COMPUTING)","ModuleDescription":"","CrossModule":"","ModuleCredit":"12","Workload":"--","Prerequisite":"(IS2101 Business and Technical Communication or CS2101 Effective Communication for Computing Professionals or their equivalents)\r\nand\r\n(CS2103/CS2103T Software Engineering or IS2103 Enterprise Systems Development Concepts or IS2150 E-Business Design and Implementation or BT2101 IT and Decision Making)","Preclusion":"EG3601","Corequisite":"NIL"},{"ModuleCode":"CS1010X","ModuleTitle":"Programming Methodology","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"COMPUTER SCIENCE","ModuleDescription":"This module introduces the fundamental concepts of problem solving by computing and programming using an imperative programming language. It is the first and foremost introductory course to computing and is equivalent to CS1010, CS1010S and CS1010E Programming Methodology. The module will be taught using the Python programming language and topics covered include problem solving by computing, writing pseudo-codes, basic problem formulation and problem solving, program development, coding, testing and debugging, fundamental programming constructs (variables, types, expressions, assignments, functions, control structures, etc.), fundamental data structures: arrays, strings and structures, simple file processing, and basic recursion.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-1-3-3","Prerequisite":"","Preclusion":"CS1010 or its equivalent, CS1010FC","Corequisite":""},{"ModuleCode":"CS3201R","ModuleTitle":"Software Engineering Project I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"COMPUTER SCIENCE","ModuleDescription":"This 1-MC module adds a research component to the host module, enabling students to acquire more in-depth understanding of the research issues pertaining to the subject matter.","CrossModule":"","ModuleCredit":"1","Workload":"0-0-0-2-1","Prerequisite":"Co-read with host module in current semester or pass host module in previous semester. Student selection process is enforced.","Preclusion":"CS3215","Corequisite":"CS3202 Software Engineering Project II"},{"ModuleCode":"CS3240R","ModuleTitle":"Interaction Design","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"COMPUTER SCIENCE","ModuleDescription":"This 1-MC module adds a research component to the host module, enabling students to acquire more in-depth understanding of the research issues pertaining to the subject matter.","CrossModule":"","ModuleCredit":"1","Workload":"0-0-0-2-1","Prerequisite":"Co-read with host module in current semester or pass host module in previous semester. Student selection process is enforced.","Preclusion":"","Corequisite":""},{"ModuleCode":"DSC5102","ModuleTitle":"Business Analytics Capstone Project","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"ANALYTICS & OPERATIONS","ModuleDescription":"This module provides an opportunity for teams of students to work with organizations throughout the world to identify important organizational issues, engage in data collection and analysis, and recommend insightful solutions. Through action-based learning that spans over one year, it aims to develop personal capabilities, professional competencies, and academic knowledge in a real business setting.","CrossModule":"","ModuleCredit":"12","Workload":"1-0-0-7-2","Prerequisite":"NIL","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"ECA5313","ModuleTitle":"Topics in Econometrics","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"ECONOMICS","ModuleDescription":"This module is designed to cover topics that are not covered under ECA5103 Quantitative and Computing Methods. Topics such as Bayesian econometrics, microeconometrics, panel regressions, limited dependent variable models, simultaneous equations models and marcoeconometric modelling for forecasting and policy analyese are likely to be covered under this module.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-2-5","Prerequisite":"NIL","Preclusion":"ECA5253/ECA5304/ECA5103","Corequisite":"NIL"},{"ModuleCode":"ECA5881","ModuleTitle":"Topics in Economic Policy","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"ECONOMICS","ModuleDescription":"The purpose of this module is to introduce students to the application of economic theory to public policy. The emphasis will place on economic\r\nanalysis of public policy. Topics include market failures and government intervention, intellectual property right protection, taxation, income distribution, education, public goods, social security and health care.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-2-5","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EE1001X","ModuleTitle":"Emerging Technologies in Electrical Engineering","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"ELECTRICAL & COMPUTER ENGINEERING","ModuleDescription":"This module introduces students to contemporary issues, emerging technologies and new frontiers in electrical engineering. It serves to demonstrate to students how the EE curriculum is designed to address these aspects via a top-down approach. The module consists of 5 distinct parts of approximately 4  hour lectures and integrated with some self-learning activities. Each part focuses on each of the following areas / topics:\n\n•\tCommunications and Networking\n•\tPower and Energy Systems\n•\tMicro / nanoelectronics\n•\tControl & Robotics\n•\tGrand challenges for engineering – the role of EE \n\nThe lectures will be conducted by a group of faculty members who are experts in the respective areas. Although the lectures are meant to focus on contemporary issues and emerging technologies, an appropriate level of historical perspective will be used to demonstrate how each subfield has evolved from the traditional areas of EE so that students can see both the connections between different areas and the driving force behind the rapid development and expansion of EE in the last few decades. Prior to this series of lectures focusing on specific areas, a detailed introduction of the EE curriculum will also be  given in the first lecture. The philosophy underpinning the curriculum and its strength and constraints will be highlighted. The module will conclude with student presentations on a topic in an area of their  interest. Students are assessed through assignments, reports and presentations.","CrossModule":"","ModuleCredit":"4","Workload":"4-0-0-3-3","Prerequisite":"A-level Math, and A-level Physics","Preclusion":"EE1001, EE1001FC","Corequisite":""},{"ModuleCode":"EE3032","ModuleTitle":"Innovation & Enterprise II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"ELECTRICAL & COMPUTER ENGINEERING","ModuleDescription":"In this module, students will work in a team project to design and build an electronic system which includes both digital and analog circuits and therefore requires both\r\nhardware and software design. The functionalities of the electronic system are determined by the students themselves. They will go through the steps of conceptual\r\nsystem design, detailed technical design, bread-board prototyping, printed circuit board implementation, system integration, testing & debugging and demonstration of the final working model. The project work will be continuously documented by each student in an individual project design portfolio.","CrossModule":"","ModuleCredit":"6","Workload":"0-0-3-3-9","Prerequisite":"EE2024 Programming for Computer Interfaces","Preclusion":"EE2001 Project\r\nCG3002 Embedded Systems Design Project","Corequisite":"Nil"},{"ModuleCode":"EE3701","ModuleTitle":"Digital Media Technologies","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"ELECTRICAL & COMPUTER ENGINEERING","ModuleDescription":"This module provides a broad view of the state-of-the-art in digital media technologies.  The major topics covered are: business & market environment, film production technologies, TV technology, audio production, mobile media technologies, human-computer interaction and user interface design, virtual reality, mixed reality, and tangible media.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-4-3","Prerequisite":"CS1010FC/CS1010E/CG1101","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"EE4001","ModuleTitle":"B.Eng. Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"ELECTRICAL & COMPUTER ENGINEERING","ModuleDescription":"In this module, students will do a research project over two semesters on a topic of current interest in Electrical and Computer Engineering. Students learn how to apply skills acquired in the classroom and also think of innovative ways of solving problems. Apart from intrinsic rewards such as the pleasure of problem solving, students are able to acquire skills for independent and lifelong learning. The objective of this module is to teach skills, such as questioning, forming hypotheses and gathering evidence. Students learn to work in a research environment.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-0-15","Prerequisite":"Level 4 Standing","Preclusion":"CG4001","Corequisite":""},{"ModuleCode":"EE4302","ModuleTitle":"Advanced Control Systems","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"ELECTRICAL & COMPUTER ENGINEERING","ModuleDescription":"This module provides the foundation for a more advanced level control systems course. Topics include system description, controllability, observability, selection of pole locations for good design, observer design, full-order and reduced-order observers, combined control law and observer. It is also a first course in nonlinear systems and control. Topics include non-linearities in control systems, use of root-locus in analysis of non-linear systems, describing function and its use in analysis and design of control systems, non-linear ordinary differential equations, singular points, and phase-plane analysis.","CrossModule":"","ModuleCredit":"4","Workload":"2.0-1.0-0.5-2.5-4.0","Prerequisite":"EE3331C","Preclusion":"","Corequisite":""},{"ModuleCode":"EE4305E","ModuleTitle":"Introduction To Fuzzy/Neural Systems","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module introduces students to the fundamental knowledge, theories and applications of fuzzy logic and neural networks. It examines the principles of fuzzy sets and fuzzy logic, which leads to fuzzy inference and control. It also gives students an understanding of the structures and learning process of a neural network. Topics covered include: fuzzy set theory, fuzzy systems and control, basic concepts of neural networks, single-layer and multilayer perceptrons, self-organizing maps and neural network training.","CrossModule":"","ModuleCredit":"4","Workload":"2.0-1.0-0.5-2.5-4.0","Prerequisite":"EE2010E or EE2023E","Preclusion":"TEE4305","Corequisite":""},{"ModuleCode":"EE4505","ModuleTitle":"Power Semiconductor Devices & ICs","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"ELECTRICAL & COMPUTER ENGINEERING","ModuleDescription":"The module provides a state-of-the-art overview of devices, development and basic understanding of the physics of power semiconductors. The module covers: Carrier physics in power devices: mobility, resistivity, life-time, high-level injection; Breakdown voltage and junction termination: avalanche breakdown, punch-through breakdown; Power devices: power MOSFET for synchronous rectifiers, power diode and recovery phenomena, power transistor and quasi-saturation effects, gate turn-off thyristor, MOS-controlled bipolar device; Smart power ICs: evolution, high-voltage power MOSFETs in integrated circuits, technological limitations in power ICs, protection techniques in power ICs.","CrossModule":"","ModuleCredit":"4","Workload":"2-0.5-0.25-4.25-3","Prerequisite":"EE2021 or equivalent","Preclusion":"","Corequisite":""},{"ModuleCode":"EE5666","ModuleTitle":"Industrial Attachment","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"ELECTRICAL & COMPUTER ENGINEERING","ModuleDescription":"This module provides engineering research students with\nwork attachment experience in a company.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG1603","ModuleTitle":"TIP - Product & Business Plan Competition","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"EG1603 is a hands-on, competitive, experiential learning module that is ideal for students to gain insight, confidence, and basic capabilities about the theoretical and practical aspects of technopreneurship. The course is setup as a competition to emulate the competitive nature of industry and intensify the learning. Student teams will participate in several boot camps at the start of the module and receive advice from mentors throughout. The intention is to develop a (technical) solution for a specified problem and a viable business model to be combined into a business plan that is presented to judges at the end of the module.","CrossModule":"","ModuleCredit":"2","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG2201A","ModuleTitle":"Introduction to Design Thinking","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"The module introduces students to the fundamentals of design thinking. Design thinking is a series of processes which develops abilities to observe and listen, think and question critically, collaborate effectively and prototype to innovate creatively in an interdisciplinary environment. These are important skills for engineering students who are interested and passionate about design. Students will be taught in a studio setting and will be expected to spend much time practicing what is learnt.","CrossModule":"","ModuleCredit":"4","Workload":"2.5-0-4-3.5-0","Prerequisite":"nil","Preclusion":"nil","Corequisite":"nil"},{"ModuleCode":"EG2603","ModuleTitle":"TIP - Product & Business Plan Development","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"EG2603 is a hands-on, competitive, experiential learning program that is ideal for students to gain insight, confidence, and basic capabilities about the theoretical and practical aspects of technopreneurship. The course is setup as a competition to emulate the competitive nature of industry and intensify the learning as a continuation from EG1603. Selected teams from “EG1603 TIP - Product & Business Plan Competition”, supported by mentors, will build prototypes and validate business models in this module. The focus will be on prototyping the solutions and devising commercialization strategies which will be presented to judges at a final event.","CrossModule":"","ModuleCredit":"2","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG2605","ModuleTitle":"Undergraduate Research Opportunities Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG2606A","ModuleTitle":"Independent Work","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"","CrossModule":"","ModuleCredit":"2","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG2606B","ModuleTitle":"Independent Work","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG3601","ModuleTitle":"Industrial Attachment Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"","CrossModule":"","ModuleCredit":"12","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG3602","ModuleTitle":"Vacation Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"","CrossModule":"","ModuleCredit":"6","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"EG3611","ModuleTitle":"Industrial Attachment","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"This internship module is for students who are admitted\ninto the B.Eng. degree requiring a compulsory 24-week\ninternship. The type of internship varies according to the\nprogrammes. Internships integrate knowledge and theory\nlearned in the classroom with practical application and skill\ndevelopment in a professional setting. It enables students\nto learn about the latest developments in the industries\nand to interact with engineers and other professionals as\nthey join projects or tasks that help to develop or enhance\ntheir skills whilst contributing to the organization. Students\ncan apply for the approved internships publicised by the\nfaculty or seek approval for self-sourced internships.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-36-4","Prerequisite":"Students should be of or are expected to be at least Stage 3 in standing.\nStudent should complete CFG career coaching modules (to be finalized) prior to start of internship.","Preclusion":"EG3601 Industrial Attachment Programme\nEG3602 Vacation Internship Programme\nEG3612 Vacation Internship Programme","Corequisite":""},{"ModuleCode":"EG3612","ModuleTitle":"Vacation Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"This internship module is for students who are admitted\ninto the B.Eng. degree requiring a compulsory 12-week\ninternship. The type of internship varies according to the\nprogrammes. Internships integrate knowledge and theory\nlearned in the classroom with practical application and skill\ndevelopment in a professional setting. It enables students\nto learn about the latest developments in the industries\nand to interact with engineers and other professionals as\nthey join projects or tasks that help to develop or enhance\ntheir skills whilst contributing to the organization. Students\ncan apply for approved internships publicised by the\nfaculty or seek approval for self-sourced internships.","CrossModule":"","ModuleCredit":"6","Workload":"0-0-0-36-4","Prerequisite":"Students should have completed at least Stage 2 of studies.\nStudent should have completed CFG career coaching modules (to be finalized) prior to start of internship.","Preclusion":"EG3601 Industrial Attachment Programme\nEG3602 Vacation Internship Programme\nEG3611 Industrial Attachment","Corequisite":""},{"ModuleCode":"ENV3202","ModuleTitle":"Environmental Studies Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"DEAN'S OFFICE (SCIENCE)","ModuleDescription":"This module is designed for undergraduate students pursuing the Bachelor of Environmental Studies degree with the aim of helping them gain working experience in\nthe environmental industry during their undergraduate study and to prepare them for employment after graduation.\n\nThe module requires students to perform a structured and supervised internship in a company/organization for 10-12 weeks during Special Terms. Through regular meetings and feedback with internship supervisors and BES academic advisors, students will assimilate and translate knowledge acquired from the curriculum to performing tasks and assignments in the actual working environment, giving them an extra edge when transiting to the work force.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"For BES students only. Students must have completed at least 2 regular semesters of studies at the point of application.","Preclusion":"","Corequisite":""},{"ModuleCode":"FAS2551","ModuleTitle":"FASS Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"DEAN'S OFFICE (ARTS & SOCIAL SC.)","ModuleDescription":"This module gives FASS students the opportunity to pursue an internship as part of their undergraduate study. Interested students will need to secure a position and perform an internship in a company or organization, either for 8-12 weeks full time in special term, or 12-16 weeks part time in a regular semester. They will submit journal entries and other written reports, and meet with an Academic Advisor and Workplace Supervisor. Through the process, students will be exposed to corporate culture, sharpen soft skills, practice what they have learned in the classroom, and gain useful work experience.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40/16","Prerequisite":"Students must have completed at least 60MC before they can enrol in the module.\nCohort 2014 and before: CFG1001 Headstart\nCohort 2015: CFG1010 Roots & Wings and Career Catalyst\nCohort 2016 onwards: CFG1010 Roots & Wings","Preclusion":"Cohort 2016 onwards: Students who have completed or are pursuing the year-long NOC programmes are not allowed to read this module. Students should therefore consider their options carefully before embarking on their internships.","Corequisite":"NA"},{"ModuleCode":"FAS2553","ModuleTitle":"Work Experience Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"DEAN'S OFFICE (ARTS & SOCIAL SC.)","ModuleDescription":"This internship module is open to full-time FASS undergraduate students who have completed at least 60MCs and plan to proceed on an approved internship\r\nof at least 10 weeks in duration in the vacation period. This module recognizes work experiences in fields that could lead to viable career pathways.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-36-4","Prerequisite":"This internship module is open to full-time FASS undergraduate students who have completed at least 60 MC and plan to proceed on an approved internship of at least 10 weeks in duration in the vacation period.","Preclusion":"Cohort 2016 onwards: FASS students who have completed or are pursuing the year-long NOC programmes are not allowed to read this module. Students should therefore consider their options carefully before embarking on their internships.","Corequisite":""},{"ModuleCode":"FIN6002","ModuleTitle":"Corporate and Financial Inermediation Theory","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"FINANCE","ModuleDescription":"This is a foundation (theory) course of corporate finance. The course reviews basic concepts of game theory, information economics, and contract theory used in the corporate finance and financial intermediation theory. The topics cover financial structure, financing investment, tax system, dividend policy, M&A, bankruptcy and reorganization, and banking and financial intermediation.","CrossModule":"","ModuleCredit":"4","Workload":"3-0-0-6-6","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"FST2288","ModuleTitle":"Basic UROPS in Food Science & Technology I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"This module is designed to give level 2 students an introduction to research. The student will undertake a laboratory based investigation on a topic proposed by the supervisor. Students work independently but under the close supervision of the supervisor.","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"FST1101 and Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"FST2289","ModuleTitle":"Basic UROPS in Food Science & Technology II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"his module is an extension of FST2288 and a more detailed and prolonged study stretching over two semesters.","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"FST1101 and Departmental Approval","Preclusion":"Nil","Corequisite":"Nil"},{"ModuleCode":"FST3288","ModuleTitle":"Advanced UROPS in Food Science & Technology I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"This module allows students to develop their research skills by working on a supervised project which will be laboratory based. It is a similar module to FST2288 but the topic will require a deeper understanding of food sciences.  Students will work  independently under close supervision of the supervisor.","CrossModule":"","ModuleCredit":"4","Workload":"NA","Prerequisite":"By permission.","Preclusion":"","Corequisite":""},{"ModuleCode":"FST3289","ModuleTitle":"Advanced UROPS in Food Science & Technology II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"CHEMISTRY","ModuleDescription":"This module is an extension of FST3288 and involves a more detailed and prolonged study stretching over two semesters. ","CrossModule":"","ModuleCredit":"4","Workload":"NA","Prerequisite":"FST3288, and by permission.","Preclusion":"","Corequisite":""},{"ModuleCode":"GE6225","ModuleTitle":"GIS Research Thesis","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"GEOGRAPHY","ModuleDescription":"Following on from GE5225 Thesis Planning and Preparation, GE6225 provides students with an opportunity to conduct an in depth research project as part of their MSc (Applied GIS). Students are required to apply relevant research approaches and techniques under the guidance of an advisor to a live problem in the field, as outlined in their original, and to write the research thesis in the form of a thesis (10,000 words maximum) or an original research paper for a reputable international journal in the field. The research underpinning the thesis will also be presented in a seminar.","CrossModule":"","ModuleCredit":"12","Workload":"1-0-0-1-28","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"GE6226","ModuleTitle":"GIS Research Project","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"GEOGRAPHY","ModuleDescription":"GE6226 GIS Research Project module provides students on the project track of the MSc in Applied GIS with an opportunity to conduct an in-depth project. Students are required to apply relevant GIS approaches and techniques under the guidance of an advisor to a live problem in the field.","CrossModule":"","ModuleCredit":"8","Workload":"1-0-0-1-18","Prerequisite":"Prior to conducting the module of GE6226GIS Research Project, students must have passed all the other four core modules (see below) and any four elective modules forming the taught component of the MSc in Applied GIS.\n\n• Core modules\nGE5223: Introduction to Applied GIS\nGE5219: Spatial Programming\nGE6211: Spatial Data Handling\nGE5226: GIS Applications [new module]","Preclusion":"Nil","Corequisite":"Nil"},{"ModuleCode":"GEH1008","ModuleTitle":"Nations & Nat'lisms in S Asia","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"SOUTH ASIAN STUDIES PROGRAMME","ModuleDescription":"This module examines the role which nationalism has played in the formation and political development of the nations and states of South Asia.  It examines nationalist forces in anti-colonial struggles, in post-colonial state formation and in contemporary political developments.  It will be of relevance to students with an interest in political developments in Asia, with particular reference to forms of nationalism and nation-building","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-2-5","Prerequisite":"","Preclusion":"GEK1035","Corequisite":""},{"ModuleCode":"GEH1025T","ModuleTitle":"Global Environmental Issues","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"GEH1025T is an interdisciplinary module that brings together perspectives from different disciplines to provide deep insights into known and emerging global environmental issues and to develop polcies for achieving environmental, economic and social sustainability in a holistic manner. Given the scope of the module and its educational outcomes, the module draws students from diverse disciplines within NUS including \"Law\", \"Business\" and \"Computing\", etc. The key strength of the module is its diversity in terms of disciplinary composition. To take advantage of this diversity, the module promotes \"collaborative learning\" through peer teaching & learning by dividing the large class into multi-disciplinary teams of 5 students. The instructor assigns reading materials to individual teams on broad topics that cut across human society and culture.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-1-2","Prerequisite":"","Preclusion":"GEK1522, GEK1522T, GEH1025","Corequisite":""},{"ModuleCode":"GEH1041","ModuleTitle":"Engaging the natural environment in ASEAN","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"UNIVERSITY ADMINISTRATION","Department":"OFFICE OF STUDENT AFFAIRS","ModuleDescription":"This module was designed as a foundation to a community service project in ASEAN. Weekly topics will provide students with an overview of history and contemporary society with a focus on the intersections between the capitalist globalization and development and some of the major consequences on poverty, inequality, migration and social change in selected ASEAN countries. The module also introduces students to debates around service learning and questions of development assistance/community service and \"volunteer tourism\" in a globalizing age. Lastly, the module provides a four week training workshop led by CELC experts where via break-out groups, students will learn hands-on simulations of proposal writing and oral presentation to potential funding agencies.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-5-2","Prerequisite":"","Preclusion":"GEK1066","Corequisite":""},{"ModuleCode":"GEK1010T","ModuleTitle":"Property Management","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module provides an overview of property management allowing students to appreciate the basic theories, concepts and principles; gain knowledge of the wide spectrum of property management functions; as well as understand how property management is vital in the context of advancement in information technology and changing demographic and social trends. The major topics include: the scope and functions of property management, legislations and regulations, lease management, maintenance management, fire safety management, facilities management, building automation systems, management information systems, security and risk management, financial and investment management, management corporations and town councils, as well as estate upgrading and renewal.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-4-3","Prerequisite":"","Preclusion":"Not for Real Estate students","Corequisite":""},{"ModuleCode":"GEK1035","ModuleTitle":"Nations & Nationalisms in South Asia","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"SOUTH ASIAN STUDIES PROGRAMME","ModuleDescription":"This module examines the role which nationalism has played in the formation and political development of the nations and states of South Asia.  It examines nationalist forces in anti-colonial struggles, in post-colonial state formation and in contemporary political developments.  It will be of relevance to students with an interest in political developments in Asia, with particular reference to forms of nationalism and nation-building","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-2-5","Prerequisite":"","Preclusion":"GEH1008","Corequisite":""},{"ModuleCode":"GEK1042","ModuleTitle":"Intellectual Property In Cyberspace","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF BUSINESS","Department":"STRATEGY AND POLICY","ModuleDescription":"Intellectual Property (IP) are creations of the human mind. They are the intangible assets of an individual or a company and are increasingly viewed as the foundations for wealth creation, especially in a knowledge-based economy. The ability to harness and protect IP is thus of paramount importance in encouraging and fostering inventions and innovations. With advances in computer technology and the advent of Internet, IP moves from the brick-and-mortar\" world into cyberspace. This module requires students to learn and reflect on the nature of IP rights and their contributions to wealth creation. Students analyse real cases to tease out IP issues, formulate their opinions and defend these views in class. Typically, the issues examined span across areas such as law, business and public policies. To broaden our students’ perspectives on the issues, comparisons are made between the legal position and policy responses in Singapore with those elsewhere in the world.","CrossModule":"","ModuleCredit":"4","Workload":"3-0-0-2-5","Prerequisite":"","Preclusion":"GET1007","Corequisite":""},{"ModuleCode":"GEK1066","ModuleTitle":"Engaging the natural environment in ASEAN","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"UNIVERSITY ADMINISTRATION","Department":"OFFICE OF STUDENT AFFAIRS","ModuleDescription":"This module was designed as a foundation to a community service project in ASEAN. Weekly topics will provide students with an overview of history and contemporary society with a focus on the intersections between the capitalist globalization and development and some of the major consequences on poverty, inequality, migration and social change in selected ASEAN countries. The module also introduces students to debates around service learning and questions of development assistance/community service and \"volunteer tourism\" in a globalizing age. Lastly, the module provides a four week training workshop led by CELC experts where via break-out groups, students will learn hands-on simulations of proposal writing and oral presentation to potential funding agencies.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-5-2","Prerequisite":"","Preclusion":"GEH1041","Corequisite":""},{"ModuleCode":"GEK1522T","ModuleTitle":"Global Environmental Issues","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"Environmental protection is now fundamental to the development of a sustainable global society. No longer is human\r\ninfluence on the planet confined to the local environment, but now extends across political boundaries - often resulting in regional or even global impacts. As a result, society, industry and agriculture are under increasing pressure to improve environmental performance and cut resource consumption and pollution. Around the world, governments are striving to minimise waste production, protect water resources, reduce energy consumption and improve the quality of the urban living environment. As the human global population grows exponentially and the life-support systems of the planet continue to deteriorate, there is a growing international recognition that environmental problems require truly global solutions. This course will focus on the issues and causes of global environmental issues including: population growth, resource exploitation and threats to the atmosphere, hydrosphere and biosphere. The aim of the course will be to provide students with a knowledge and appreciation of the inter-related problems and challenges of sustainable\r\ndevelopment.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-1-2","Prerequisite":"NIL","Preclusion":"GEK1522, GEH1025, GEH1025T","Corequisite":"NIL"},{"ModuleCode":"GEK1523T","ModuleTitle":"Innovativeness In Engineering Design","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"Engineering is an innovative profession. This can be observed from the machinery, equipment, utensils and products that engineers have designed throughout the history of mankind. The aim of this module is to widen the horizons of a students understanding of the man-made world in which he is a part of. Topics to be covered include: (1) Characteristics of engineering design, (2) History of engineering innovation, (3) Examples of engineering innovation, (4) Engineering design process, (5) Innovativeness in engineering design, (6) Case studies. A few hands on and interactive tutorials will also be included. The module does not involve mathematics and is therefore suitable for all non-engineering students.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0-0-4","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"GEM1505A","ModuleTitle":"Engineering by Design - Devices and Systems","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"The module aims to introduce both engineering and non-engineering students to the historical background, design process and methodology involved in the design of useful consumer and industrial products, systems and services. As the historical development of design is traced, key principles of design are highlighted. These principles are then described and discussed in greater detail. For the application to problems, students will be working in small groups, interacting with faculty and research staff in an active laboratory where they would be required to think critically and implement solutions to a given “grand challenge” in an integrated way. The grand challenges” could be everyday problems such as to design a portable kit for making river/sea water drinkable. The final grade will be based on 100% continuous assessment involving assignments, laboratory work and projects.","CrossModule":"","ModuleCredit":"4","Workload":"1-0-3-3-3","Prerequisite":"Nil","Preclusion":"Nil","Corequisite":"Nil"},{"ModuleCode":"GEM1505B","ModuleTitle":"Engineering by Design - Electrical Systems","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"DEAN'S OFFICE (ENGINEERING)","ModuleDescription":"This module traces the evolution of electrical & electronics systems. Students are taken through the steps required for the design and building of simple electrical and electronic systems. The student will learn to formulate the real problem or real system behaviour, monitor performance and develop innovative solutions. The module consists of two parts: “knowledge & skills” and “hands on challenges”. At the beginning, themes for the challenges will be presented to all students. Students, working in small groups, will then choose one of the themes and set upon identifying the main problem and methods of solving them. The final grade will be based on 100% continuous assessment involving assignments, laboratory work and projects.","CrossModule":"","ModuleCredit":"4","Workload":"1-0-3-3-3","Prerequisite":"Nil","Preclusion":"Nil","Corequisite":"Nil"},{"ModuleCode":"GEQ1000","ModuleTitle":"Asking Questions","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"UNIVERSITY ADMINISTRATION","Department":"OFFICE OF THE PROVOST","ModuleDescription":"There are many ways to ask questions, and many kinds of questions that different disciplines investigate. For a start, this module introduces six dominant modes of questioning from the perspective of computational thinking, design thinking, engineering, philosophy, science, and social sciences. These six perspectives serve as a starting point to introduce all undergraduate students to different modes of questioning across these disciplines, and provide an initial exposure to how scholars from these disciplines pursue specific lines of questioning of everyday issues. We emphasize that while there is only limited time and space wthin one module to devote to specific disciplinary lines of investigations, we encourage all students to actively think about other lines of questioning, other questions that need to be asked, particularly in disciplines not represented in this introductory platform as we move through this journey together. We expect that in future subsequent offereings, other disciplinary modes of investigations may also be introduced.","CrossModule":"","ModuleCredit":"4","Workload":"2-2-0-0-6","Prerequisite":"NIL","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"GER1000","ModuleTitle":"Quantitative Reasoning","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"STATISTICS & APPLIED PROBABILITY","ModuleDescription":"This module aims to equip undergraduates with basic reasoning skills on using data to address real world issues. What are some potential complications to keep in mind as we plan what data to collect and how to use them to address our particular issue? When two things are related (e.g. smoking and cancer), how can we tell whether the relationship is causal (e.g. smoking causes cancer)? How can quantitative reasoning help us deal with uncertainty or elucidate complex relationships? These and other questions will be discussed using real world examples.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-3-4","Prerequisite":"Nil","Preclusion":"Nil","Corequisite":"Nil"},{"ModuleCode":"GES1000T","ModuleTitle":"Labour Law In Singapore","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"The course introduces students to the development of industrial relations and labour laws in Singapore. Students can thus understand why labour relations are the way they are in Singapore. In addition, the course is not purely historical. A substantial part of the course is also aimed at looking at the current legal problems faced by the employees end employers in Singapore. This course will be of general relevance to all as students in all likelihood going to be employees or employers some day. This course is offered to BTech students only.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-3-4","Prerequisite":"NIL","Preclusion":"SSB1204, SSB1204T, GES1000","Corequisite":""},{"ModuleCode":"GES1002T","ModuleTitle":"Global Economic Dimensions Of Singapore","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This course will introduce students to the dynamics of the world economy and the impact on Singapore in the last two centuries. It will demonstrate how Singapore grew through continual dependence on the rest of the world in different ways by focusing on major labour, capital and technological factors, in which threats are also seen as opportunities. This course is offered to BTech students only.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-3-4","Prerequisite":"Nil","Preclusion":"EC2202, EC2373, GES1002, SSA2220, SSA2220T","Corequisite":""},{"ModuleCode":"GET1005","ModuleTitle":"Evaluating Academic Arguments","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"NON-FACULTY-BASED DEPARTMENTS","Department":"CTR FOR ENGLISH LANGUAGE COMMUNICATION","ModuleDescription":"This module introduces students to some basic concepts in informal logic to help them apply these arguments in academic writing so that they will be better able to evaluate as well as write critical and logical responses to materials read in various disciplines ranging from the social sciences to engineering and the sciences.","CrossModule":"","ModuleCredit":"4","Workload":"2-3-0-3-2","Prerequisite":"","Preclusion":"GEM1008","Corequisite":""},{"ModuleCode":"HM5105","ModuleTitle":"Child & Adolescent Mental Health including Learning Disabilities","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"YONG LOO LIN SCHOOL OF MEDICINE","Department":"DIVISION OF GRADUATE MEDICAL STUDIES","ModuleDescription":"Participants will learn to identify & apply psychosocial interventions in children & adolescents","CrossModule":"","ModuleCredit":"4","Workload":"1-1.5-0-4-28.5","Prerequisite":"NIL","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"HR1424T","ModuleTitle":"Business, Management And People","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This subject begins with an overview of major changes in the global environment today and how these changes impact\r\norganizations and people, followed by a reassessment of the effectiveness of organizational and business models with\r\nan aim to establish alternatives that are effective in today’s environment. An examination of people relations and learning not only demonstrates the human side of the business management, but also casts light on the complexity and the reality that exists across organizations. The subject concludes by focusing on work and career, discussing their meaning and the implications on individuals. Major topics include Rethinking the World; Rethinking Business and Organizations; Rethinking Learning; Rethinking People and Reframing Work & Career.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0-2-1.5","Prerequisite":"","Preclusion":"HR2002T","Corequisite":""},{"ModuleCode":"HR2002T","ModuleTitle":"Human Capital in Organizations","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This multi-disciplinary course in human relations management invites students to look, from different perspectives, at\r\nsome major themes that constitute various challenges in the new economy. Students are led to examine the significance of social influences on individual behavior, thoughts and feelings. This theme is taken through to an exploration of ‘emotions’ and ‘diversity’ as social phenomena central to understanding and managing human relations at work. In the light of these, various aspects of the employment relationship are discussed. Through this thematic approach, students are also able to gain some insights into such group dynamics as communication, teamwork and motivation.","CrossModule":"","ModuleCredit":"4","Workload":"3(sectional)-0-0-4-3","Prerequisite":"","Preclusion":"HR1424T","Corequisite":""},{"ModuleCode":"ID2041","ModuleTitle":"Design Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"DIVISION OF INDUSTRIAL DESIGN","ModuleDescription":"This module is a design-related industry attachment program.","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"ID2042","ModuleTitle":"Work Experience Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"DIVISION OF INDUSTRIAL DESIGN","ModuleDescription":"This internship module is open to full-time undergraduate students who have completed at least 60MCs and plan to proceed on an approved internship of at least 10 weeks in duration in the vacation period. This module recognizes\r\nwork experiences in fields that could lead to viable career pathways that may or may not be directly related to the student’s major. It is accessible to students for academic credit even if they had previously completed internship stints  for academic credit not exceeding 12MC, and if the new workscope is substantially differentiated from previously completed ones.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-36-4","Prerequisite":"This internship module is open to full-time undergraduate students who have completed at least 60MCs and plan to proceed on an approved internship of at least 10 weeks in duration in the vacation period.","Preclusion":"Full-time undergraduate students who have accumulated more than 12MCs for previous internship stints.","Corequisite":""},{"ModuleCode":"IE3100E","ModuleTitle":"Systems Design Project","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"The objective of the module is to give students the opportunity to apply concepts learnt to solving real world problems. In this module, each student is assigned to work on a company-sponsored problem that requires application of industrial and systems engineering concepts. The module provides the opportunity for students to identify key problems and craft an objective, scope and deliverable for a piece of work, collect and analyze the relevant data, and apply the appropriate tool to solve the problem. It also enables students to improve their communication skills through report writing and presentation to the various stakeholders.","CrossModule":"","ModuleCredit":"8","Workload":"0-0-0-4-6","Prerequisite":"Level 3 Standing","Preclusion":"TIE3100","Corequisite":"NIL"},{"ModuleCode":"IE4100","ModuleTitle":"B.Eng.Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"INDUSTRIAL SYSTEMS ENGINEERING & MGT","ModuleDescription":"The objective of the module is to give students exposure to research. In this module, each student is assigned to a research project that requires application of industrial and systems engineering concepts. The module provides the opportunity for students to conduct self study by reviewing literature, defining a problem, analyzing the problem critically, conducting design of experiments, and recommending solutions. It also enables students to improve their communication skills through technical report writing and oral presentation.","CrossModule":"","ModuleCredit":"12","Workload":"0.3-0-0-5.7-9","Prerequisite":"ISE B.Eng. 4 standing","Preclusion":"","Corequisite":""},{"ModuleCode":"IE4100E","ModuleTitle":"BTech Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"The objective of the module is to give students exposure to research. In this module, each student is assigned to a research project that requires application of industrial and systems engineering concepts. The module provides the opportunity for students to conduct self study by reviewing literature, defining a problem, analyzing the problem critically, conducting design of experiments, and recommending solutions. It also enables students to improve their communication skills through technical report writing and oral presentation.","CrossModule":"","ModuleCredit":"12","Workload":"0.3-0-0-5.7-9","Prerequisite":"Level 4 Standing","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"IE4239E","ModuleTitle":"Selected Topics in Quality Engineering","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module introduces students to either emerging topics in quality engineering or specialised topics. Students will learn and understand concepts in quality management and quality technology. This module will enable them to keep abreast with current developments in quality engineering and broaden their exposure to various specialised topics.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0-3-3","Prerequisite":"IE2100E Probability Models with Applications\r\nIE3101E Statistics for Engineering Application","Preclusion":"TIE4239","Corequisite":"Nil"},{"ModuleCode":"IE4299","ModuleTitle":"Selected Topics In Industrial Engineering","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"INDUSTRIAL SYSTEMS ENGINEERING & MGT","ModuleDescription":"This module introduces students to either emerging topics in industrial engineering or specialised topics. Students will learn and understand evolving concepts in operation research and industrial engineering. This module will enable them to keep abreast with current developments in the industrial engineering field and broaden their exposure to various specialised topics.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0-3-3","Prerequisite":"IE2100, IE2110","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"IE5666","ModuleTitle":"Industrial Attachment","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"INDUSTRIAL SYSTEMS ENGINEERING & MGT","ModuleDescription":"This module provides engineering research students with\nwork attachment experience in a company.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"IPS3550","ModuleTitle":"EXTENDED POLITICAL SCIENCE INTERNSHIP","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"POLITICAL SCIENCE","ModuleDescription":"Internships vary in length but all take place within an organisation, are vetted and approved by the Department’s internship advisor, have relevance to the\r\nmajor in Political Science, involve the application of subject knowledge and theory in reflection upon the work, and are assessed.\r\n\r\nAvailable credited internships (if any) will be advertised at the beginning of each semester. In exceptional cases, internships proposed by students may be approved by the Department.","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"Students should:\r\n- have completed a minimum of 24 MC in Political Science; and\r\n- have declared Political Science as their Major.","Preclusion":"Any other XX3550 internship modules\r\n(Note: Students who change major may not do a second internship in their new major)","Corequisite":""},{"ModuleCode":"IS4010","ModuleTitle":"Industry Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF COMPUTING","Department":"INFORMATION SYSTEMS & ANALYTICS","ModuleDescription":"This module enables students to apply the computing knowledge and skills that they have acquired in class to industry internships in companies/organizations. Students in industry internships will be jointly guided by supervisors from both the companies/organizations and the school Their progress on internship projects will be monitored during internship period, and their performance will be assessed through letter grades at the end of the internship. The internship duration will be 6 months, consisting of both a full-time and part-time component. Full-time internship attachment will last for 3 months during the NUS vacation period, and will continue on a part-time basis that will last for 3 months during the NUS study semester.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-40-0","Prerequisite":"(i) At least 80 MCs fulfilled, and\r\n(ii) IS2101 Business and Technical Communication, and\r\n(iii) IS2103 Enterprise Systems Development Concepts for Information System degree programme student, or IS2150 E-Business Design and Implementation for Electronic Commerce degree programme student, or BT2101 IT and Decision Making for Business Analytics degree programme student","Preclusion":"","Corequisite":""},{"ModuleCode":"JS3229","ModuleTitle":"Field Studies in Japan","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"JAPANESE STUDIES","ModuleDescription":"The module enables students to build upon and test knowledge learned at NUS through field study in Japan. The module combines a period of intensive\r\ncoursework and/or independent research on the NUS campus with a 10-20 day field study experience in Japan. The focus will differ based on the expertise of\r\nthe faculty member teaching the module. The module may centre on the environment, tourism, urban and rural development, traditional performance or\r\npopular culture.","CrossModule":"","ModuleCredit":"4","Workload":"18-22-0-50-40","Prerequisite":"LAJ2202 or pass in JLPT level 3 or equivalent","Preclusion":"Nil","Corequisite":"Nil"},{"ModuleCode":"LAF1201","ModuleTitle":"French 1","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"CENTRE FOR LANGUAGE STUDIES","ModuleDescription":"This course focuses on basic linguistic and communicative structures of the French language.  By developing the four skills of listening, speaking, reading and writing as well as teaching basic grammar and vocabulary, it aims at helping students achieve communicative competence in simple everyday situations and personal interaction. The module will also attempt to help students optimise their learning by teaching them vital strategies for language learning and language use.  The assessment for this module is 100% Continuous Assessment. \n\n","CrossModule":"","ModuleCredit":"4","Workload":"4-0-0-3-3","Prerequisite":"This module is meant for students with no prior knowledge of the target language. Students with prior knowledge (including spoken proficiency) must contact CLS to take a placement test.","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"LSM1301X","ModuleTitle":"General Biology","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"This is an introductory module that explores what a living thing is, the basics of life, and the science behind it. The course will introduce the chemistry of life and the unit of life. The question of how traits are inherited will be discussed and the field of biotechnology, including its applications and the ethical issues involved will be introduced. The diversity of life on earth will be explored, with discussions how life on earth possibly came about and how biologists try to classify and make sense of the diversity. The course will also introduce the concept of life functions from cells to tissues and from organs to systems. The concept of how organisms maintain their internal constancy and organisation of major organ systems will be discussed. The focus will be to introduce the unifying concepts in biology and how they play a role in everyday life.","CrossModule":"","ModuleCredit":"4","Workload":"1-1-1-1-2","Prerequisite":"","Preclusion":"Must not have passed A-Level or H2 Biology, or equivalents. Student must not have passed LSM1301 or LSM1301FC.","Corequisite":""},{"ModuleCode":"LSM2288","ModuleTitle":"Basic UROPS in Life Sciences I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"LSM1101 or LSM1102 or LSM1103 or LSM1104; AND Departmental Approval.","Preclusion":"","Corequisite":""},{"ModuleCode":"LSM2289","ModuleTitle":"Basic UROPS in Life Sciences II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"LSM1101 or LSM1102 or LSM1103 or LSM1104; and Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"LSM3273","ModuleTitle":"Ecology, Conservation and Management of Sri Lankan Ecosystems","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"This module will provide a first-hand experience on the ecology, conservation and management of Sri Lankan ecosystems. The course will include basic lectures on the natural history and conservation issues of Sri Lanka, with the core being a 4-week field excursion to representative habitats and protected areas in the country. Emphasis will be on ecological research skills, assessments of complex conservation situations, and data analysis, all within a field setting.","CrossModule":"","ModuleCredit":"4","Workload":"1.5-6-0-15-0","Prerequisite":"LSM2251","Preclusion":"","Corequisite":""},{"ModuleCode":"LSM3288","ModuleTitle":"Advanced UROPS in Life Sciences I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"LSM3289","ModuleTitle":"Advanced UROPS in Life Sciences II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"LSM3311","ModuleTitle":"Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"In addition to having an academic science foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives Science students the opportunity to acquire work experience via internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 10-12 weeks during Special Term.\r\n\r\nThrough regular meetings with the Academic Advisor (AA) and internship Supervisor, students learn how knowledge acquired in the curriculum can be transferred to perform technical/practical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have completed 3 regular semesters of study, have declared Life Sciences as first major and have completed a minimum of 32 MCs in Life Sciences major at time of application.","Preclusion":"XX3311 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"LSM3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"BIOLOGICAL SCIENCES","ModuleDescription":"In addition to having a good academic record and technical foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives non-Applied Science students the opportunity to embark on internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 16-20 weeks during regular semester. Through regular meetings with the Academic Advisor and internship Supervisor, students explore how knowledge learnt in the curriculum can be transferred to perform technical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Life Sciences as first major and have completed a minimum of 32 MCs in Life Sciences major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"MA1301X","ModuleTitle":"Introductory Mathematics","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"This module serves as a bridging module for students without 'A' - level mathematics. Its aim is to equip students with appropriate mathematical knowledge and skill so as to prepare them for further study of mathematics-related disciplines. At the end of the course, students are expected to attain a level of proficiency in algebra and calculus equivalent to the GCE Advanced Level. Major topics: Sets, functions and graphs, polynomials and rational functions, inequalities in one variable, logarithmic and exponential functions, trigonometric functions, sequences and series, techniques of differentiation, applications of differentiation, maxima and minima, increasing and decreasing functions, curve sketching, techniques of integration, applications of integration, areas, volumes of solids of revolution, solution of first order ordinary differential equations by separation of variables and by integrating factor, complex numbers, vectors.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-0-4","Prerequisite":"Pass in O-level Additional Mathematics or AO-level or H1 Mathematics","Preclusion":"Those with A-level or H2 passes in Mathematics. Student must not have passed MA1301 or MA1301FC","Corequisite":""},{"ModuleCode":"MA2288","ModuleTitle":"Basic UROPS in Mathematics I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"This module is entirely project based. It allows the student the opportunity to engage in independent learning and research. It also affords the student the chance to delve into topics that may not be present in the regular curriculum. ","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"MA1101R and departmental approval","Preclusion":"","Corequisite":""},{"ModuleCode":"MA2289","ModuleTitle":"Basic UROPS in Mathematics II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"This provides a continuation of work done in MA2288 and the project should be of two semester's duration. Please see section 4.4.3.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"MA1101R and departmental approval","Preclusion":"","Corequisite":""},{"ModuleCode":"MA3288","ModuleTitle":"Advanced UROPS in Mathematics I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"This module is entirely project based. It allows the student the opportunity to engage in independent learning and research. It also affords the student the chance to delve into topics that may not be present in the regular curriculum. Projects registered under MA3288 are intended to be at a more advanced level than those under MA2288/9. ","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"Departmental approval","Preclusion":"","Corequisite":""},{"ModuleCode":"MA3289","ModuleTitle":"Advanced UROPS in Mathematics II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"This module provides a continuation of work done in MA3288 and the project should be of two semesters' duration. Please see section 4.4.3.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"Departmental approval","Preclusion":"","Corequisite":""},{"ModuleCode":"MA3311","ModuleTitle":"Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"In addition to having an academic science foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives Science students the opportunity to acquire work experience via internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 10-12 weeks during Special Term.\r\n\r\nThrough regular meetings with the Academic Advisor (AA) and internship Supervisor, students learn how knowledge acquired in the curriculum can be transferred to perform technical/practical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have completed 3 regular semesters of study, have declared Mathematics or Applied Mathematics as first major and have completed a minimum of 32 MCs in Mathematics or Applied Mathematics major at time of application.","Preclusion":"XX3311 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"MA3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"In addition to having a good academic record and technical foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives non-Applied Science students the opportunity to embark on internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 16-20 weeks during regular semester. Through regular meetings with the Academic Advisor and internship Supervisor, students explore how knowledge learnt in the curriculum can be transferred to perform technical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-40-0","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Mathematics or Applied Mathematics as first major and have completed a minimum of 32 MCs in Mathematics or Applied Mathematics major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":"Nil"},{"ModuleCode":"ME3000","ModuleTitle":"Independent Study 1","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"MECHANICAL ENGINEERING","ModuleDescription":"","CrossModule":"","ModuleCredit":"2","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"ME3001","ModuleTitle":"Independent Study 2","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"MECHANICAL ENGINEERING","ModuleDescription":"","CrossModule":"","ModuleCredit":"2","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"ME4101","ModuleTitle":"Bachelor Of Engineering Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"MECHANICAL ENGINEERING","ModuleDescription":"This module consists mainly of an industrial or research-based project carried out under the supervision of one or more faculty members. It introduces students to the basic methodology of research in the context of a problem of current research interest. The module is normally taken over two consecutive semesters, and is a core requirement of the B.Eng. (Mech) program.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-15-0","Prerequisite":"Stage 4 standing","Preclusion":"","Corequisite":""},{"ModuleCode":"ME4101A","ModuleTitle":"Bachelor Of Engineering Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"MECHANICAL ENGINEERING","ModuleDescription":"This module consists mainly of a research-based project carried out under the supervision of one or more faculty members. It introduces students to the basic methodology of research in the context of a problem of current research interest. The module is normally taken over two consecutive semesters, and is a core requirement of the B.Eng. (Mech) programme.","CrossModule":"","ModuleCredit":"8","Workload":"0-0-0-10-0","Prerequisite":"Stage 4 standing","Preclusion":"","Corequisite":""},{"ModuleCode":"ME4263","ModuleTitle":"Fundamentals of Product Development","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"MECHANICAL ENGINEERING","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"ME5666","ModuleTitle":"Industrial Attachment","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ENGINEERING","Department":"MECHANICAL ENGINEERING","ModuleDescription":"This module provides engineering research students with\nwork attachment experience in a company.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"MUA3223","ModuleTitle":"Cultural Encounters - Bali Excursion and Study Tour","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"YONG SIEW TOH CONSERVATORY OF MUSIC","Department":"YONG SIEW TOH CONSERVATORY OF MUSIC","ModuleDescription":"This course will take place over two weeks in Bali, Indonesia. The course will take place at the end of semester 2 (around the second week of May). During this\ntime students will work together to prepare traditional and group-composed music for performances in Bali.","CrossModule":"","ModuleCredit":"4","Workload":"0-4-0-4-2","Prerequisite":"","Preclusion":"Students will apply directly to the instructor seeking permission to join. The Professional Integration faculty and administration will decide who is admitted based on their work and drive in other courses and activities. Students must demonstrate genuine interest and capacity for the goals of the course to be considered.","Corequisite":""},{"ModuleCode":"NM1101X","ModuleTitle":"Communications, New Media and Society","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"COMMUNICATIONS AND NEW MEDIA","ModuleDescription":"This module explores ways in which people create and use the variety of emerging networked, mobile and social media channels to communicate meaning in a globalized world. It explores organizational and societal contexts in such areas as games, health, politics, business, public relations, design and activism, with attention paid to creating applications with social impact. Phenomena such as relationships and social life in cyberspace, activism for social change, performance art, deviant behaviour online, communication and community, new business paradigms and economic models of organizing and issues in human-computer interaction are explored in-depth.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0-2-4","Prerequisite":"Nil","Preclusion":"NM1101E or NM1101FC","Corequisite":""},{"ModuleCode":"NM3202","ModuleTitle":"Governance and New Media","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"COMMUNICATIONS AND NEW MEDIA","ModuleDescription":"New media governance involves collective action by\n\ngovernments, international organizations, nongovernmental\n\norganizations, the private sector and\n\ncivil society to establish agreements about\n\nstandards, policies, rules, enforcement mechanisms\n\nand dispute resolution procedures. This module\n\nexamines the process of governance of new media\n\ntechnologies and the challenges it presents to the\n\nstakeholders involved. It also examines the legal\n\nand regulatory constraints affecting new media\n\ntechnologies and the implications these constraints\n\nhave on the nature and quality of governance.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-2-5","Prerequisite":"NIL","Preclusion":"NM2202","Corequisite":"NIL"},{"ModuleCode":"NUR1108A","ModuleTitle":"Nursing Practice Experience 1.2","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"YONG LOO LIN SCHOOL OF MEDICINE","Department":"NURSING/ALICE LEE CTR FOR NURSING STUD","ModuleDescription":"This module enables students to integrate theory and clinical knowledge in the community and surgical settings.","CrossModule":"","ModuleCredit":"7","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"NUR2107A","ModuleTitle":"Nursing Practice Experience 2.2","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"YONG LOO LIN SCHOOL OF MEDICINE","Department":"NURSING/ALICE LEE CTR FOR NURSING STUD","ModuleDescription":"","CrossModule":"","ModuleCredit":"8","Workload":"0-0-0-320-0","Prerequisite":"","Preclusion":"NUR2107 Clinical Practicum 2.2 is precluded","Corequisite":"NUR2113 Mental Health Nursing, NUR2121 Maternal and Child Health Nursing"},{"ModuleCode":"PC1221X","ModuleTitle":"Fundamentals of Physics 1","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"This module aims to bridge the gap between O level physics and 1st year university physics level. The module covers the fundamentals of two branches of physics: mechanics and thermodynamics. Topics included in the part on mechanics are linear motion, curvilinear motion, relative motion, circular motion, Newtons laws of motion, work and energy, conservation of energy, linear momentum and conservation, rotational kinematics, torque and moment of inertia, rotational dynamics, conservation of angular momentum, gravitation and planetary motion, static equilibrium, oscillatory motion and fluid mechanics. The part on thermodynamics encompasses topics such as temperature and zeroth law of thermodynamics, temperature scales, thermal expansion, heat and internal energy, thermal processes, first law of thermodynamics, ideal gas laws and kinetic theory of gasses.","CrossModule":"","ModuleCredit":"4","Workload":"2-2-1.5-1.5-3","Prerequisite":"'O' level pass in Physics or Combined Science (Physics & Chemistry OR Physics & Biology) or its equivalent","Preclusion":"A' level or H2 pass in Physics or PC1141, or PC1142 or PC1431 or PC1431FC or PC1431X or PC1221 or PC1221FC","Corequisite":""},{"ModuleCode":"PC1222X","ModuleTitle":"Fundamentals of Physics II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"The module aims to bridge the gap between O level Physics and first year university physics level. The module covers the fundamentals of three branches of physics: electricity & magnetism, optics and modern physics. Topics included in the part on electricity & magnetism are Coulombs law, electric field and potential, capacitance, current and resistance, DC circuits, magnetic fields, magnetic effects on current, electromagnetic induction, and electromagnetic waves. The part on optics encompasses topics such as reflection and refraction, systems of lenses, optical instruments, interference, diffraction, grating and polarization. Topics covered in the part on modern physics are blackbody radiation, photoelectric effect, atomic transitions and spectra, the uncertainty principle, wave-particle duality, radioactivity and decay processes, binding energy and fusion energy and fusion & fission.","CrossModule":"","ModuleCredit":"4","Workload":"2-2-1.5-1.5-3","Prerequisite":"'O' level pass in Physics or Combined Science (Physics & Chemistry OR Physics & Biology) or its equivalent","Preclusion":"'A' level or H2 pass in Physics or PC1222 or PC1143, or PC1144 or PC1432 or PC1432X","Corequisite":"Nil"},{"ModuleCode":"PC1431X","ModuleTitle":"Physics IE","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"The module is designed to provide a clear and logical introduction to the concepts and principles of mechanics and thermodynamics, with illustrations based on applications to the real world. Topics covered include motion in one dimension; curvilinear motion; circular motion; relative motion; Newton's laws; friction; work and energy; conservative forces, conservation of energy; linear momentum and conservation, collisions; rotational kinematics; moment of inertia and torque; rotational dynamics; conservation of angular momentum; temperature and the zeroth law, temperature scales; heat and internal energy, specific heat capacities, work for ideal gases, first law of thermodynamics; equipartition of energy, entropy and the second law, heat engines; entropy changes for reversible and irreversible processes. The module is targeted essentially at Engineering students.","CrossModule":"","ModuleCredit":"4","Workload":"2-0.5-0.5-1-3","Prerequisite":"Students from FOE (i.e. Civil Eng, Environmental Eng,  Common Engineering, Mechanical Eng, Bioengineering, Industrial & Systems Eng and Material Science & Eng) with ‘A’ level or H2 pass in Physics; or 'A' level or H2 pass in Physics","Preclusion":"Students majoring in Physics. Students must not have passed PC1431 or PC1431FC.","Corequisite":""},{"ModuleCode":"PC1432X","ModuleTitle":"Physics IIE","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"This module introduces fundamental concepts of physics and is illustrated with many practical examples. Topics covered include a) Electricity and magnetism, where the basic concepts of electric and magnetic fields, forces on charged particles, electric potential, electromotive force, work and energy, are described. The properties of basic electrical circuits comprising resistors, inductors and capacitors are discussed, along with analysis of their transient and steady-state behaviour. Understanding the role of Maxwell's equations in electromagnetism is emphasized; b) Waves, introducing properties of waves, including geometric optics, propagation, interference and diffraction, and electromagnetic waves; and c) Quantum physics, where new physics concepts which led to the quantization of energy are introduced, leading to an explanation of atomic transitions, atomic spectra and the physical and the chemical properties of the atom. The uncertainty principle, wave-mechanics and wave particle duality concepts are covered, together with the use of wave functions in predicting the behaviour of trapped particles. The module is targeted essentially at Engineering students.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0.5-2-4","Prerequisite":"Students from FOE ( i.e. Computer Eng, Common\nEngineering, Bioengineering, Industrial & Systems Eng and Material Science & Eng) with ‘A’ level or H2 pass in Physics; or 'A' level or H2 pass in Physics; or PC1221/PC1221FC/PC1221X & PC1222/PC1222X","Preclusion":"Students majoring in Physics or students who have passed in PC1143 or PC1144 or PC1432 are not allowed to take this module.","Corequisite":""},{"ModuleCode":"PC2230","ModuleTitle":"Thermodynamics and Statistical Mechanics","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"This module is an introductory course in statistical and thermal physics, and is a prerequisite to advanced statistical mechanics. The topics to be covered include: mathematical background, laws of thermodynamics, thermodynamics functions, chemical equilibrium and phase transitions, kinetic theory, postulates of statistical mechanics, independent particle approach of statistical mechanics, basic distributions, ideal gases, paramagnetism, equipartition theorem, etc.  Science and engineering students with a background knowledge of general physics are the targeted students.","CrossModule":"","ModuleCredit":"4","Workload":"3-1-0-0-6","Prerequisite":"PC1142, PC1144, PC1431, PC1431FC, PC1431X or PC1433 and MA1505 or MA1507","Preclusion":"","Corequisite":""},{"ModuleCode":"PC2288","ModuleTitle":"Basic UROPS in Physics I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"Please note that only 4MCs can be accredited towards major requirements in case that a student undertakes 8MCs for both PC2288 and PC2289.","CrossModule":"","ModuleCredit":"4","Workload":"To be designed on consultation","Prerequisite":"PC1141 or PC1142, and Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"PC2289","ModuleTitle":"Basic UROPS in Physics II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"Please note that only 4MCs can be accredited towards major requirements in case that a student undertakes 8MCs for both PC2288 and PC2289.","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"PC1141 or PC1142; and Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"PC3288","ModuleTitle":"Advanced UROPS in Physics I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"Please note also that only 4MCs can be accredited towards major requirements in case that a student undertakes 8MCs for both PC3288 and PC3289.","CrossModule":"","ModuleCredit":"4","Workload":"To be designed on consultation","Prerequisite":"Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"PC3289","ModuleTitle":"Advanced UROPS in Physics II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"Please see section 4.4.3.","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"PC3311","ModuleTitle":"Undergraduate Professional Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"In addition to having an academic science foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives Science students the opportunity to acquire work experience via internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 10-12 weeks during Special Term.\r\n\r\nThrough regular meetings with the Academic Advisor (AA) and internship Supervisor, students learn how knowledge acquired in the curriculum can be transferred to perform technical/practical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have completed 3 regular semesters of study, have declared Physics as first major and have completed a minimum of 32 MCs in Physics major at time of application.","Preclusion":"XX3311 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"PC3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHYSICS","ModuleDescription":"In addition to having a good academic record and technical foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives non-Applied Science students the opportunity to embark on internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 16-20 weeks during regular semester. Through regular meetings with the Academic Advisor and internship Supervisor, students explore how knowledge learnt in the curriculum can be transferred to perform technical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-40-0","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Physics as first major and have completed a minimum of 32 MCs in Physics major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":"Nil"},{"ModuleCode":"PF3401","ModuleTitle":"Practical Training Scheme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"BUILDING","ModuleDescription":"The intent of the module is to enable students to apply the knowledge gained from academic studies to practical situations in the relevant local or foreign industry.\r\nThere are also opportunities for students to be employed on funded research projects undertaken by staff members of the department Students who opt for this module are required to undergo nine (9) weeks of approved practical training at the end of the second semester in their Third Year of study. They are to submit a Log Book, an Interim Report, and an Academic Report for assessment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-44-0","Prerequisite":"NIL","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"PH4550","ModuleTitle":"Internship: Philosophy for Teaching","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"PHILOSOPHY","ModuleDescription":"Students will intern in an educational organization approved by the Department. (e.g. Logic Mills, which specializes in courses on analytical thinking skills to\r\nschools and other educational organizations). During the internship, they will learn to use their philosophical skills to teach, and through practice, reflect on the usefulness of Philosophy in education practice and intellectual development.","CrossModule":"","ModuleCredit":"5","Workload":"3-3-2-1-3.5","Prerequisite":"Cohort 2011 and before:\r\nCompleted 80MCs, including 28MCs in PH, with a minimum CAP of 3.50 or be on the Honours track. (Students will apply to Department to read this module and qualified applicants will be selected through\r\nan interview). \r\n\r\nCohort 2012 onwards:\r\nCompleted 80MCs, including 28MCs in PH, with a minimum CAP of 3.20 or be on the Honours track. (Students will apply to Department to read this module and qualified applicants will be selected through an interview).","Preclusion":"Any other internship module.","Corequisite":"NIL"},{"ModuleCode":"PP5146","ModuleTitle":"Decentralization, Governance & Sustainable Development","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","Department":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","ModuleDescription":"Today, a number of local governments and communities are expected to play vital roles in improving people’s lives. This module introduces normative theories and timely real-world cases pertinent to decentralization and local governance. These are discussed in relation to topics of government\r\nefficiency, equity, corruption, conflict management, democratization, and sector-specific issues in education, health, and environmental and disaster management. Students will learn theoretical and empirical approaches to\r\nstudying the topics and acquire analytical skills to address the challenges faced by localities and decentralizing states. The module is multidisciplinary, drawing on views from economics, public administration, and political science.","CrossModule":"","ModuleCredit":"4","Workload":"3-0-3-3-4","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"PP5192","ModuleTitle":"Data Analytics: Science, Art and Applications","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","Department":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","ModuleDescription":"Data analytics is a scientific and data-driven approach to help organisations solve problems, make better decisions, and increase productivity. Despite its business origins, analytics has been applied in governments, hospitals, and\r\nmuseums, spurning a $125 billion market. However, a significant number of analytics projects fail due, in part, to poor science (techniques), art (e.g., communication, implementation, change management) or both. Against this\r\nbackground, this module covers the critical success factors that span these topics: Structuring the problem, data evaluation, psychometrics, statistical modelling, text analytics, and agile project management. It also discusses\r\napplications in government, human capital management, and healthcare.","CrossModule":"","ModuleCredit":"4","Workload":"3-0-0-4-3","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"PP5274","ModuleTitle":"Financial Management for Policy Makers","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","Department":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"PP5304","ModuleTitle":"ATTACHMENT PROGRAMME IN SINGAPORE","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","Department":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","ModuleDescription":"Students will be attached to Singapore Ministries or agencies and participate in a programme of visits to these organisations. The main objective of this attachment is to bridge theory and practice, and provide a strategic overview of policy areas and the processes of policy making. The training will encourage students to explore factors leading to good governance, and is intended to provide a hands-on practical experience in a particular area of interest they may have. Students will be required to present a paper at a seminar at the end of the programme. The module is for MPM students.","CrossModule":"","ModuleCredit":"8","Workload":"0-0-0-5-5","Prerequisite":"","Preclusion":"MPM5004","Corequisite":""},{"ModuleCode":"PP5310","ModuleTitle":"PUBLIC MANAGEMENT SEMINARS","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","Department":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","ModuleDescription":"The module provides a comprehensive coverage of the dominant challenges that contemporary societies face and the policies that governments respond with. Such challenges include: Multi-ethnic/religious societies and social harmony; Health Pandemics; Unemployment and Social Unrest; Geopolitics and International Relations; Refugees and Asylum Seekers; Corruption Prevention and Good Governance; Heritage Conservation and Media and Communication. The module will also devote a special section to the Singapore Experience where illustrations will be made with reference to how the Singapore government has dealt with many of these challenges.","CrossModule":"","ModuleCredit":"4","Workload":"0-3-0-4-3","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"PP5660","ModuleTitle":"INDEPENDENT STUDY MODULE","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","Department":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"PP5804","ModuleTitle":"Governance Study Project","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","Department":"LEE KUAN YEW SCHOOL OF PUBLIC POLICY","ModuleDescription":"The Governance Study Project (GSP) is a year-long team- based project. Consisting of a study trip at the end of the first semester, a seminar, and a final conference the end of the special term, the GSP connects the beginning to the end of the degree programme, requiring students to put to use the knowledge and skills learnt in each module. Through projects that are real public problems, students will acquire skills related to analysis of complex managerial\r\nproblems, basic research, and writing and other presentational modes. The  GSP also aims to develop team building and a strong sense of cohort.","CrossModule":"","ModuleCredit":"4","Workload":"1-0-0-5-4","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"PR2288","ModuleTitle":"Basic UROPS in Pharmacy I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHARMACY","ModuleDescription":"Please see section 4.4.3.  Target students: Pharmacy Year Two or Year Three and Science","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"PR1110 and Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"PR2289","ModuleTitle":"Basic UROPS in Pharmacy II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHARMACY","ModuleDescription":"Please see section 4.4.3.  Target students: Pharmacy Year Two or Year Three and Science","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"PR1110 and Departmental Approval","Preclusion":"","Corequisite":""},{"ModuleCode":"PR3288","ModuleTitle":"Advanced UROPS in Pharmacy I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHARMACY","ModuleDescription":"Please see section 4.4.3.  Target students: Pharmacy Year Three and Science","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"By permission or PR2288 or PR2289","Preclusion":"","Corequisite":""},{"ModuleCode":"PR3289","ModuleTitle":"Advanced UROPS in Pharmacy II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHARMACY","ModuleDescription":"Please see section 4.4.3.  Target students: Pharmacy Year Three and Science","CrossModule":"","ModuleCredit":"4","Workload":"","Prerequisite":"By permission or PR2288 or PR2289","Preclusion":"","Corequisite":""},{"ModuleCode":"PR3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"PHARMACY","ModuleDescription":"In addition to having a good academic record and technical foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives non-Applied Science students the opportunity to embark on internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 16-20 weeks during regular semester. Through regular meetings with the Academic Advisor and internship Supervisor, students explore how knowledge learnt in the curriculum can be transferred to perform technical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-40-0","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Pharmacy as first major and have completed a minimum of 32 MCs in Pharmacy major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":"Nil"},{"ModuleCode":"PS3550","ModuleTitle":"Political Science Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"POLITICAL SCIENCE","ModuleDescription":"Internships vary in length but all take place within an organisation, are vetted and approved by the Department’s internship advisor, have relevance to the\r\nmajor in Political Science, involve the application of subject knowledge and theory in reflection upon the work, and are assessed.\r\n\r\nAvailable credited internships (if any) will be advertised at the beginning of each semester. In exceptional cases, internships proposed by students may be approved by the Department.","CrossModule":"","ModuleCredit":"4","Workload":"NA","Prerequisite":"Students should:\r\n- have completed a minimum of 24 MC in Political Science; and\r\n- have declared Political Science as their Major.","Preclusion":"Any other XX3550 internship modules\r\n(Note: Students who change major may not do a second internship in their new major)","Corequisite":"NIL"},{"ModuleCode":"QF3311","ModuleTitle":"Undergraduate Professional Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"In addition to having an academic science foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives Science students the opportunity to acquire work experience via internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 10-12 weeks during Special Term.\r\n\r\nThrough regular meetings with the Academic Advisor (AA) and internship Supervisor, students learn how knowledge acquired in the curriculum can be transferred to perform technical/practical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have completed 3 regular semesters of study, have declared Quantitative Finance as first major and have completed a minimum of 32 MCs in Quantitative Finance major at time of application.","Preclusion":"XX3311 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"QF3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"In addition to having a good academic record and technical foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives non-Applied Science students the opportunity to embark on internships during their undergraduate study.\n\nThe module requires students to compete for position and perform a structured internship in a company/institution for 16-20 weeks during regular semester. Through regular meetings with the Academic Advisor and internship Supervisor, students explore how knowledge learnt in the curriculum can be transferred to perform technical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-40-0","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Quantitative Finance as first major and have completed a minimum of 32 MCs in Quantitative Finance major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":"Nil"},{"ModuleCode":"QF5204","ModuleTitle":"Numerical Methods in Quantitative Finance","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"MATHEMATICS","ModuleDescription":"This module is designed for graduate students in quantitative finance. It covers the programming methodology, techniques, data structures and algorithms used by practitioners in finance in the valuation of investment instruments. Numerical methods and implementations will be discussed.","CrossModule":"","ModuleCredit":"4","Workload":"3-0-0-3-4","Prerequisite":"Departmental approval","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"RE4202","ModuleTitle":"Real Estate Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"REAL ESTATE","ModuleDescription":"The Real Estate Internship Programme (REIP) aims to provide real-world learning experience to third year undergraduates at both private and public real estate organisations.  Industry specialisation areas include development activities, professional consultancy services, fund management as well as policy exposure in governmental agencies. Suitable candidates are chosen to be interns and are matched with participating firms.  They will undergo training for a minimum duration of nine weeks in May to July of each year.  The selection criteria include, but are not limited to, the following requirements: Scholastic ability, positive attitude, superior presentation and communication skills, and entrepreneurial drive.  As part of the selection process, each candidate is required to submit a proposal outlining his/her potential contribution(s) to the organisation.  This module precludes students who take RE4203.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-3-4","Prerequisite":"RE3101 Advanced  Real Estate Valuation\r\nRE3103 Real Estate Development\r\nRE3104 Real Estate Investment Analysis","Preclusion":"","Corequisite":""},{"ModuleCode":"SE2227","ModuleTitle":"Southeast Asian Gardens: History and Symbolism","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"SOUTHEAST ASIAN STUDIES","ModuleDescription":"This module will provide a historical introduction to Southeast Asian gardens, describe their situation and plan, and explore their aesthetic value (gardens as\r\nplaces of pleasure). Their philosophical significance (garden, microcosm, place of meditation) is equally important but less well known. Artificial gardens have existed in Southeast Asia (Sumatra, Java, Bali, Vietnam, Myanmar) since the seventh century. They contain Chinese and Indian influences, but exemplify a Southeast Asian view of the universe in microcosm. Gardens are a significant but overlooked medium of Southeast Asian symbolic representation. Persian,\r\nIndian, Chinese, and Japanese gardens will be invoked to provide context.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-4-3","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"SPH3201","ModuleTitle":"Public Health Practice","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SAW SWEE HOCK SCHOOL OF PUBLIC HEALTH","Department":"SAW SWEE HOCK SCHOOL OF PUBLIC HEALTH","ModuleDescription":"This module introduces students to the public health infrastructure and functions in Singapore, as well as provide hands-on exposure to work by way of attachments\r\nat selected public health agencies. It allows students to explore career opportunities in public health, develop related essential skills, specifically soft skills such as management of resources, time, money and human, interpersonal relationships, communication and advocacy and provides practical exposure to selected public health careers.","CrossModule":"","ModuleCredit":"4","Workload":"1-0-0-5-4","Prerequisite":"Students must have completed at least 8 MCs of essential modules and at least 8 MCs of approved electives for the Minor in Public Health.","Preclusion":"","Corequisite":""},{"ModuleCode":"SSA2220T","ModuleTitle":"Global Economic Dimensions Of Singapore","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This course will introduce students to the dynamics of the world economy and the impact on Singapore in the last two centuries. It will demonstrate how Singapore grew through continual dependence on the rest of the world in different ways by focusing on major labour, capital and technological factors, in which threats are also seen as opportunities. This course is offered to BTech students only.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-3-4","Prerequisite":"Nil","Preclusion":"EC2202, EC2373, GES1002T, SSA2220, GES1002","Corequisite":""},{"ModuleCode":"SSB1204T","ModuleTitle":"Labour Law In Singapore","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"The course introduces students to the development of industrial relations and labour laws in Singapore. Students can thus understand why labour relations are the way they are in Singapore. In addition, the course is not purely historical. A substantial part of the course is also aimed at looking at the current legal problems faced by the employees end employers in Singapore. This course will be of general relevance to all as students in all likelihood going to be employees or employers some day. This course is offered to BTech students only.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-3-4","Prerequisite":"NIL","Preclusion":"SSB1204, GES1000, GES1000T","Corequisite":"NIL"},{"ModuleCode":"ST2288","ModuleTitle":"Basic UROPS in Statistics and Applied Probability I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"STATISTICS & APPLIED PROBABILITY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"ST1131 or ST1232; AND Departmental Approval","Preclusion":"Nil","Corequisite":"Nil"},{"ModuleCode":"ST2289","ModuleTitle":"Basic UROPS in Statistics and Applied Probability II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"STATISTICS & APPLIED PROBABILITY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"ST1131 or ST1232; and Departmental Approval","Preclusion":"nil","Corequisite":""},{"ModuleCode":"ST3288","ModuleTitle":"Advanced UROPS in Statistics & Applied Probability I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"STATISTICS & APPLIED PROBABILITY","ModuleDescription":"Please see section 4.4.3.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"nil","Preclusion":"nil","Corequisite":""},{"ModuleCode":"ST3289","ModuleTitle":"Advanced UROPS in Statistics & Applied Probability II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"STATISTICS & APPLIED PROBABILITY","ModuleDescription":"","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-10-0","Prerequisite":"NIL","Preclusion":"NIL","Corequisite":""},{"ModuleCode":"ST3311","ModuleTitle":"Undergraduate Professional Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"STATISTICS & APPLIED PROBABILITY","ModuleDescription":"In addition to having an academic science foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives Science students the opportunity to acquire work experience via internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 10-12 weeks during Special Term.\r\n\r\nThrough regular meetings with the Academic Advisor (AA) and internship Supervisor, students learn how knowledge acquired in the curriculum can be transferred to perform technical/practical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have completed 3 regular semesters of study, have declared Statistics as first major and have completed a minimum of 32 MCs in Statistics major at time of application.","Preclusion":"XX3311 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"ST3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"STATISTICS & APPLIED PROBABILITY","ModuleDescription":"In addition to having a good academic record and technical foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives non-Applied Science students the opportunity to embark on internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 16-20 weeks during regular semester. Through regular meetings with the Academic Advisor and internship Supervisor, students explore how knowledge learnt in the curriculum can be transferred to perform technical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-40-0","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Statistics as first major and have completed a minimum of 32 MCs in Statistics major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":"Nil"},{"ModuleCode":"SW3103A","ModuleTitle":"Social Work Field Practice (I)","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"SOCIAL WORK","ModuleDescription":"Field Practice consists of 400 hours of full-time fieldwork in an agency or project where students work under professional supervision for the equivalent of 10 weeks from May to August. Students are taught skills in direct and indirect social work, depending on the placement. They also attend compulsory fieldwork seminars during the placement to link classroom theory to professional practice and to discuss social work methods and professional development. Assessment is made on performance in fieldwork and a written assignment on applying theory to practice and the comparative use of literature. The assignment must be submitted by the designated date.","CrossModule":"","ModuleCredit":"8","Workload":"0-1-0-31-1","Prerequisite":"SW1101E, SW2101, SW2104, SW2105. Students from 2007 cohort onwards.","Preclusion":"Nil","Corequisite":""},{"ModuleCode":"SW3104","ModuleTitle":"Social Work Field Practice (II)","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"SOCIAL WORK","ModuleDescription":"Teaching focuses on the development of professional skills for specific contexts, e.g., in a community development setting, in medical social work, in family service centres, residential\r\n\r\nhomes and in the correctional setting. Topics will include specialised knowledge and skills in needs assessments and helping strategies specific to the context the student is placed for practicum. For example, in a hospital setting, topics will include the holistic psycho-social-medical approach to healing\r\n\r\nand wellness, healthcare policies and the dynamics of primary healthcare. It is a field practice module consisting of 400 hours of full-time fieldwork where students receive professional social work supervision for the equivalent of 10 weeks from May to August.\r\n\r\n\r\n\r\nStudents are assessed on their fieldwork performance and a written assignment that relates theory to practice, with appropriate application of literature. The student assignment must be submitted by the designated date.","CrossModule":"","ModuleCredit":"8","Workload":"0-1-0-31-1","Prerequisite":"SW3103A. Students from 2007 cohort onwards.","Preclusion":"Nil","Corequisite":""},{"ModuleCode":"SW5111","ModuleTitle":"Advanced Practicum","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"SOCIAL WORK","ModuleDescription":"Candidates of MSW who have a Bachelor in Social Work degree are allowed to enrol for ‘SW5111 – Advanced Practicum’. Two specialization tracks are offered:  clinical and supervision track and programme  development  track.  The  learning  goal  is  to  enhance  social  work  practitioners’ competence and capabilities in the chosen track.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-62-0","Prerequisite":"","Preclusion":"Only for Master of Social Work (course work) students with a Bachelor in Social Work degree.","Corequisite":""},{"ModuleCode":"SW5111A","ModuleTitle":"Practicum","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"SOCIAL WORK","ModuleDescription":"Practicum is a compulsory module for candidates who do not have a Bachelor’s degree in social work or equivalent. This module is designed  to  ensure practice competence by providing  800  hour  first hand, systematic  and supervised  practice experiences in the actual field  together with seminars for integration of social work theories with practice. The stipulated hours should be completed prior to graduation.","CrossModule":"","ModuleCredit":"4","Workload":"0-2-0-62-0","Prerequisite":"","Preclusion":"Students enrolled in MSW (course work) programme.","Corequisite":""},{"ModuleCode":"TC1005","ModuleTitle":"MATLAB Programming for Chemical Engineers","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"With the widespread use of computers and computational tools in industrial practice and research, it is important for students in the chemical engineering programme to gain a firm understanding and appreciation of the fundamentals of programming, algorithmic problem solving, coding and debugging. The final goal is to be able to apply these skills to solving realistic chemical engineering problems. MATLAB, a high-level computing language will be employed due to its capability to solve domain-specific computing problems more conveniently than with traditional programming languages. MATLAB also provides the platform to span a wide variety of application areas.","CrossModule":"","ModuleCredit":"4","Workload":"3-0-2-2-3","Prerequisite":"NIL","Preclusion":"TCN1005","Corequisite":"NIL"},{"ModuleCode":"TC2411","ModuleTitle":"Mathematics for Chemical Engineers 2","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module introduces basic concepts of developing mathematical models for Chemical Engineering systems and trains students on techniques for solving the resulting differential equations. The objective is to provide mathematical foundations for solution of complex Chemical Engineering problems. This module is to be driven from Chemical Engineering systems perspective and expose students to methodology to identify appropriate simplifications in system modeling that lead to simplified mathematical description from a more comprehensive one. The module develops methods for solving first and second order differential equations, partial differential equations, and then applies them to Chemical Engineering systems.","CrossModule":"","ModuleCredit":"4","Workload":"2.5-1-0-2-4.5","Prerequisite":"TC1411 Mathematics for Chemical Engineers 1","Preclusion":"TCN2411","Corequisite":"NIL"},{"ModuleCode":"TCN2411","ModuleTitle":"Mathematics for Chemical Engineers 2","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module introduces basic concepts of developing mathematical models for Chemical Engineering systems and trains students on techniques for solving the resulting differential equations. The objective is to provide mathematical foundations for solution of complex Chemical Engineering problems. This module is to be driven from Chemical Engineering systems perspective and expose students to methodology to identify appropriate simplifications in system modeling that lead to simplified mathematical description from a more comprehensive one. The module develops methods for solving first and second order differential equations, partial differential equations, and then applies them to Chemical Engineering systems.","CrossModule":"","ModuleCredit":"4","Workload":"2.5-1-0-2-4.5","Prerequisite":"CN1411 or TCN1411","Preclusion":"TC2411","Corequisite":"NIL"},{"ModuleCode":"TE4001","ModuleTitle":"BTech Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"In this module, students will do a research project over two semesters on a topic of current interest in Electrical and Computer Engineering. Students learn how to apply skills acquired in the classroom and also think of innovative ways of solving problems. Apart from intrinsic rewards such as the pleasure of problem solving, students are able to acquire skills for independent and lifelong learning. The objective of this module is to teach skills, such as questioning, forming hypotheses and gathering evidence. Students learn to work in a research environment.\n\n\n\n","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-0-15","Prerequisite":"Level 4 Standing.","Preclusion":"TEE4001","Corequisite":""},{"ModuleCode":"TG1422","ModuleTitle":"Financial And Management Accounting","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module introduces both Financial and Management Accounting. It is suitable for engineering students with no understanding of Accounting. Basic concepts and principles of Financial Accounting are taught without being excessively technical. This knowledge is sufficient to permit intelligent analysis and evaluation of financial statements as well as understand the limitations of financial and accounting information for decision making. Students will also have a basic understanding of how relevant and timely Management Accounting information is essential for both short and long term planning. Different management accounting tools and techniques are taught to enable students to apply them in decision making.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-0-5","Prerequisite":"None","Preclusion":"None","Corequisite":""},{"ModuleCode":"TG1423","ModuleTitle":"Industrial Management","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"The management portion of the module is to expose engineering students to the theories and applications of management, organizational theory in contemporary organizations from a conceptual, analytical and pragmatic perspective. It will comprise the basic functions of management: planning, organizing, leading and controlling. Integrated into this portion are the issues of ethics, leadership, international management, technological proliferation, cultural diversity, supply chains, operations control and the management of quality and knowledge to allow students to develop their own framework for analyzing and understanding management as well as exploring and developing a personal philosophy of management. Students are also expected to complete a short term paper to reflect this understanding. The analytical portion of the module is intended as an introduction for engineering students to project management techniques. It covers concepts of project organization using work breakdown structure, economic feasibility analysis, planning and scheduling using critical path and PERT methods, finalizing schedules based on resource availability, and monitoring schedule and budget variances. Project management software is introduced with illustrative examples for students to try on their own.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-0-5","Prerequisite":"None","Preclusion":"None","Corequisite":""},{"ModuleCode":"TG2415","ModuleTitle":"Ethics In Engineering","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module highlights to students the ethical issues they will face working as an engineering professional. The issues covered range from the rationale for an engineering code of practice, risk and safety issues, conflict of interest, ethical issues in research. This module will be offered to second or higher year engineering students as they need their engineering background to better understand the issues involved. Case studies will be presented to cover real life issues.","CrossModule":"","ModuleCredit":"4","Workload":"2-0.5-0-3-2","Prerequisite":"NIL","Preclusion":"TTG2415","Corequisite":"NIL"},{"ModuleCode":"TG3001","ModuleTitle":"Industrial Practice","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module leverages on the student’s work experience and focus the student’s mind on exploring and reflecting on his/her place and role in his/her organization, the key success factors that can maximize his/her contributions and ensure his/her success at work, and how the concepts and theories gained in the classroom can be translated into industrial practice to enhance his/her work performance. Student is required to complete 4 written reports, 3 Oral presentations and with 10 Non-Examinable Enrichment Attendance upon completion of TG3001.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-15-0","Prerequisite":"Level 3 Standing","Preclusion":"TG3002, TTG3001, TTG3002","Corequisite":"NIL"},{"ModuleCode":"TG3002","ModuleTitle":"Industrial Practice","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module leverages on the student’s work experience and focus the student’s mind on exploring how the concepts and theories gained in the classroom can be translated into industrial practice to enhance his/her work performance and contribute to his/her success at work. The student will write three reports and do two presentations to explain these aspects to peers and academic advisor who is a faculty member. The module will be spread over two semesters.","CrossModule":"","ModuleCredit":"8","Workload":"0-1-0-9-0","Prerequisite":"Stage 3 standing.","Preclusion":"TG3001, TTG3001, TTG3002","Corequisite":""},{"ModuleCode":"TM4101","ModuleTitle":"B.Tech. Dissertation","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module consists mainly of a research-based project carried out under the supervision of one or more faculty members. It introduces students to the basic methodology of research in the context of a problem of current research interest. The module is normally taken over two consecutive semesters, and is a core requirement of the B.Tech. programme.","CrossModule":"","ModuleCredit":"12","Workload":"0-0-0-10-0","Prerequisite":"Senior Level 3 Standing (For AY 2006/2007 intake & earlier); Level 4 standing (For AY 2007/2008 intake onwards)","Preclusion":"NIL","Corequisite":"NIL"},{"ModuleCode":"TM4263","ModuleTitle":"Manufact'G Simulat'N & Data Communicat'N","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module provides the fundamental concepts related to the simulation of manufacturing systems. How the data between the manufacturing systems are transferred, their standard protocols are also covered. In addition the following topics are covered: Concepts of discrete-event modelling and simulation, definitions, types, essential elements in modelling, design and implementation of  manufacturing simulation models, petri-nets, model verification and validation, input information collection and analysis, interpretation of outputs, use of random inputs and variance reduction techniques, protocol standards, communication topology, MAP/TOP.","CrossModule":"","ModuleCredit":"4","Workload":"2-1-0-2-2.5","Prerequisite":"ME3162E","Preclusion":"TME4263","Corequisite":""},{"ModuleCode":"TS3245","ModuleTitle":"Professional Theatre Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"ARTS & SOCIAL SCIENCES","Department":"ENGLISH LANGUAGE & LITERATURE","ModuleDescription":"This module provides Arts 3 students majoring in Theatre Studies with the opportunity of an internship project in theatre organizations. It matches individual students' interests and skills with internship roles in stagecraft, stage production, event planning, theatre in education, research and administration offered by theatre companies.  Through research papers, regular reports, and a final presentation, students are trained to integrate theoretical knowledge with practical application, develop skills in teamwork and problem-solving, and form research parameters and gather data to address issues in theatre practice from a critical perspective.  Students are selected competitively on the basis of interviews and portfolios.","CrossModule":"","ModuleCredit":"4","Workload":"Total of 150-200 hrs","Prerequisite":"TS1101E. Only for TS Major students who are in or going into their third year.\r\n","Preclusion":"Nil","Corequisite":""},{"ModuleCode":"TTG2415","ModuleTitle":"Ethics In Engineering","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF CONTINUING & LIFELONG EDN","Department":"SCHOOL OF CONTINUING & LIFELONG EDN","ModuleDescription":"This module highlights to students the ethical issues they will face working as an engineering professional. The issues covered range from the rationale for an engineering code of practice, risk and safety issues, conflict of interest, ethical issues in research. This module will be offered to second or higher year engineering students as they need their engineering background to better understand the issues involved. Case studies will be presented to cover real life issues.","CrossModule":"","ModuleCredit":"4","Workload":"2-0.5-0-3-2","Prerequisite":"","Preclusion":"TG2415","Corequisite":""},{"ModuleCode":"UD5221","ModuleTitle":"Theory and Elements of Urban Design","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCHOOL OF DESIGN AND ENVIRONMENT","Department":"ARCHITECTURE","ModuleDescription":"This course introduces the different theoretical approaches to urban design and provides the philosophical underpinnings to the various bodies of theories. The application of these theories to the design of urban environments will be examined. With a greater understanding of the various theories, this course will serve as a base from which students can develop their own convictions and approaches to urban design. It also examines the fundamentals of urban design and the factors in the related fields of urban planning, architecture and landscape architecture that influence the creation of urban spaces. The course aims to lead students to critically examine and investigate the many ways through which the city is imagined, developed, formed and occupied. There are two components to the course, lectures and seminars. Lectures will present the theoretical concepts and models of thought regarding urban design. Seminars focus on the discussion and interrogation of influential writings and case studies of urban projects, and present opportunities for students to interpret and debate the relevance and applications of these modes of thinking and acting on the built environment.","CrossModule":"","ModuleCredit":"4","Workload":"2-2-0-2-4","Prerequisite":"Nil","Preclusion":"Nil","Corequisite":""},{"ModuleCode":"UQR2214","ModuleTitle":"Generative Syntax","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"UNIVERSITY SCHOLARS PROGRAMME","Department":"UNIVERSITY SCHOLARS PROGRAMME","ModuleDescription":"This course focuses on matters that are truly linguistic. After separating linguistic problems from ones that should be studied in other fields, the course introduces students to genuinely scientific study of human language. More specifically, by (critically) reading Radford 2009, the course provides a concise and clear introduction to current work in syntactic theory, drawing on the key concepts of\nChomsky’s Minimalist Program. By looking at data mainly from English, it will also introduce students to quite a few linguistic mysteries.","CrossModule":"","ModuleCredit":"4","Workload":"0-8-0-6-6","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"USE2320","ModuleTitle":"Transitional Justice and War Crimes Trials: Case Studies from Singapore and Asia","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"UNIVERSITY SCHOLARS PROGRAMME","Department":"UNIVERSITY SCHOLARS PROGRAMME","ModuleDescription":"War crimes trials are commonly used to address mass violence and facilitate political transition. This course examines the potential and limits of war crimes trials as transitional mechanisms, comparing them with non-legal complements and alternatives. What transitional objectives do these trials seek to achieve and how do these trials contribute to a society’s political transition? Given the many pressing and conflicting needs of post-war societies or societies in transition, should the organisation of such trials be prioritised? What are possible alternative transitional measures? What role should the law play, if at all? Using Singapore’s Second World War experience as a central case study, this module will explore the challenges faced by societies undergoing political transition and the different legal and non-legal measures adopted.","CrossModule":"","ModuleCredit":"4","Workload":"0-4-0-0-6","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"VM5106","ModuleTitle":"Practices of Palliative Medicine","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"YONG LOO LIN SCHOOL OF MEDICINE","Department":"DIVISION OF GRADUATE MEDICAL STUDIES","ModuleDescription":"This last module is designed to consolidate the teachings in the last 5 modules into practice, and to see how palliative medicine is practised into various settings in the community and in special groups of patients.","CrossModule":"","ModuleCredit":"4","Workload":"0-12-0-8-100","Prerequisite":"","Preclusion":"","Corequisite":""},{"ModuleCode":"ZB3288","ModuleTitle":"Advanced UROPS in Computational Biology I","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"DEAN'S OFFICE (SCIENCE)","ModuleDescription":"This module is intended for students to conduct mini-research projects that make use of computational methods and informatics tools to solve specific biological problems or develop bioinformatics databases and software. In principle, each project is to be supervised by an academic staff from any department in the Faculty of Science. Upon approval by the programme committee, a project can also be co-supervised by an academic staff at the School of Computing.","CrossModule":"","ModuleCredit":"4","Workload":"NA","Prerequisite":"Passed level 1000 and 2000 essential major requirements","Preclusion":"Nil","Corequisite":""},{"ModuleCode":"ZB3289","ModuleTitle":"Advanced UROPS in Computational Biology II","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"DEAN'S OFFICE (SCIENCE)","ModuleDescription":"This module is intended for students to conduct mini-research projects as a continuation of their work completed in ZB3288. These projects make use of computational methods and informatics tools to solve specific biological problems or develop bioinformatics databases and software. In principle, each project is to be supervised by an academic staff from any department in the Faculty of Science. Upon approval by the programme committee, a project can also be co-supervised by an academic staff at the School of Computing.","CrossModule":"","ModuleCredit":"4","Workload":"NA","Prerequisite":"ZB3288","Preclusion":"Nil","Corequisite":""},{"ModuleCode":"ZB3311","ModuleTitle":"Undergraduate Professional Internship","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"DEAN'S OFFICE (SCIENCE)","ModuleDescription":"In addition to having an academic science foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives Science students the opportunity to acquire work experience via internships during their undergraduate study.\r\n\r\nThe module requires students to compete for position and perform a structured internship in a company/institution for 10-12 weeks during Special Term.\r\n\r\nThrough regular meetings with the Academic Advisor (AA) and internship Supervisor, students learn how knowledge acquired in the curriculum can be transferred to perform technical/practical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"4","Workload":"0-0-0-40-0","Prerequisite":"Students must have completed 3 regular semesters of study, have declared Computational Biology as first major and have completed a minimum of 32 MCs in Computational Biology major at time of application.","Preclusion":"XX3311 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""},{"ModuleCode":"ZB3312","ModuleTitle":"Enhanced Undergraduate Professional Internship Programme","AcadYear":"2016/2017","SemesterName":"Special Term I","Faculty":"SCIENCE","Department":"DEAN'S OFFICE (SCIENCE)","ModuleDescription":"In addition to having a good academic record and technical foundation, students with good soft skills and some industrial attachment or internship experiences often stand a better chance when seeking for jobs. This module gives non-Applied Science students the opportunity to embark on internships during their undergraduate study.\n\nThe module requires students to compete for position and perform a structured internship in a company/institution for 16-20 weeks during regular semester. Through regular meetings with the Academic Advisor and internship Supervisor, students explore how knowledge learnt in the curriculum can be transferred to perform technical assignments in an actual working environment.","CrossModule":"","ModuleCredit":"12","Workload":"","Prerequisite":"SP1001 Career Planning & Preparation or NCC1001 Headstart Module (A Career Development Programme) or NCC1000 Stepup Module (A Career Development Programme) or CFG1001 Headstart Module or CFG1000 StepUp Module; students must have completed 3 regular semesters of study, have declared Computational Biology as first major and have completed a minimum of 32 MCs in Computational Biology major at time of application.","Preclusion":"XX3312 modules offered in Science, where XX stands for the subject prefix for the respective major.","Corequisite":""}]